查看 卓勒 YouTube 频道 用于网络研讨会、提示、培训和产品视频!

X
菜单 关闭

盆地


盆地

盆地


住宅、商业和工业应用的理想选择

A basin from Zoller Pump Company is an essential component of sump, sewage, and effluent systems. Constructed with your choice of high-grade foam, fiberglass, or polyethylene, the heavy-duty containers collect and contain wastewater before it’s removed from a residential, commercial, or industrial building using a submersible sewage pump. While the pump sits at the bottom of the basin, the basin sits below grade.

During operation, wastewater enters the container through an inlet port or pipe. The liquid accumulates until it reaches a certain level. When the float switch or preset control activates the pump, the device moves the water away from the building. Depending on your chosen model, your basin may work with a 2- or 3-inch vent and 2- or 3-inch discharge pipe.

When properly installed, basins are watertight and gas-tight, arriving with sealing hardware and flanges for high performance. An inlet hub made of cast iron with an anti-corrosion coating provides incredible durability.

  • 特点与优势
    • 提供高密度聚乙烯结构泡沫、聚乙烯或玻璃纤维
    • 住宅、商业和工业应用的理想选择
    • 配有必要的密封硬件和法兰
    • 提供 2” 或 3” 排气口和 2” 或 3” 排放口
    • 带垫圈的盖子和带防腐涂层的 4 英寸铸铁入口轮毂包含在污水盆中
    • 轮毂中心线位于距盆地顶部 10-1/2 英寸(26.7 厘米)(标准),可提供定制位置
    • 聚乙烯污水泵盆获得 IAPMO 认证
    • 对于 10' (3 m) 堆叠测试模型,请参阅图表
    • 用于污水泵的密封氡水池,尺寸为 18” x 22” (46 x 56 cm) 和 18” x 30” (46 x 76 cm)
    • 聚乙烯集水盆,可提供 18 英寸 x 22 英寸(46 x 56 厘米)的塑料非密封盖
    • 正确安装的污水池是水密和气密的
    • 带垫圈标准的耐用钢盖,适用于单工和双工污水盆
    • 所有面盆均采用一体式无缝结构
    • 双联盖包括两个泵板和一个检查板
    • 即装即用,安装经济简单
    • 提供尺寸工程数据
    • 额定温度 130 °F (54 °C)
    • 可通过 10' (3 m) 水堆测试的玻璃纤维型号 - 请参阅图表 (LA – RR-5311)
    • 可提供各种定制直径和长度的玻璃纤维,请咨询工厂(也可进行 10' (3 m) 水堆测试)
    • 如需更大尺寸的盆或特殊应用,请咨询工厂
    • 1 年有限保修

    笔记
    盆地不适合安装在饱和土壤静水压力超出坑顶的地方,除非通过独立的排水系统释放压力。盆盖通风和排放密封件可以是橡胶嵌件或用螺栓固定在法兰设计上。

  • 文学
  • 提供高密度聚乙烯结构泡沫、聚乙烯或玻璃纤维
  • 住宅、商业和工业应用的理想选择
  • 配有必要的密封硬件和法兰
  • 提供 2” 或 3” 排气口和 2” 或 3” 排放口
  • 带垫圈的盖子和带防腐涂层的 4 英寸铸铁入口轮毂包含在污水盆中
  • 轮毂中心线位于距盆地顶部 10-1/2 英寸(26.7 厘米)(标准),可提供定制位置
  • 聚乙烯污水泵盆获得 IAPMO 认证
  • 对于 10' (3 m) 堆叠测试模型,请参阅图表
  • 用于污水泵的密封氡水池,尺寸为 18” x 22” (46 x 56 cm) 和 18” x 30” (46 x 76 cm)
  • 聚乙烯集水盆,可提供 18 英寸 x 22 英寸(46 x 56 厘米)的塑料非密封盖
  • 正确安装的污水池是水密和气密的
  • 带垫圈标准的耐用钢盖,适用于单工和双工污水盆
  • 所有面盆均采用一体式无缝结构
  • 双联盖包括两个泵板和一个检查板
  • 即装即用,安装经济简单
  • 提供尺寸工程数据
  • 额定温度 130 °F (54 °C)
  • 可通过 10' (3 m) 水堆测试的玻璃纤维型号 - 请参阅图表 (LA – RR-5311)
  • 可提供各种定制直径和长度的玻璃纤维,请咨询工厂(也可进行 10' (3 m) 水堆测试)
  • 如需更大尺寸的盆或特殊应用,请咨询工厂
  • 1 年有限保修

笔记
盆地不适合安装在饱和土壤静水压力超出坑顶的地方,除非通过独立的排水系统释放压力。盆盖通风和排放密封件可以是橡胶嵌件或用螺栓固定在法兰设计上。