Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

X840, X841, X842 Series Grinder Pumps


X840, X841, X842 Series Grinder Pumps

Grinder

2 HP grinder pumps with explosion-proof motors

  • Features and Benefits
    • cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
    • Tested to FM standards 3600 and 3615 by CSA
    • Finned, Class 30, cast iron construction
    • Corrosion-resistant, powder coated epoxy finish
    • Discharge size: 1-1/4″ NPT
    • 20′ (6 m) cord length
    • Oil-filled, hermetically-sealed motor with Class F insulation
    • Hardened stainless steel cutter and disc, Rockwell C55-60
    • Bronze vortex impeller
    • Upper and lower ball bearing construction
    • Stainless steel screws, bolts and lifting bail
    • Dual mechanical seals with leak detection
    • Automatic thermal overload protection (1 Ph)
    • Thermal sensor protection (3 Ph)
    • Legs provide for free-standing installation
    • Preassembled systems available
    • Threaded conduit connection on pump cap to provide protection to power cord and sensor wires
    • Reversible cutter action (manual/auto**)
    • 1-1/4″ NPT vertical discharge
    • Carbon/ceramic tandem seals
    • Thermal sensors** (overload on 1 Ph)
    • Moisture probes**
    • Balanced bronze impellers
    • Stainless steel cutter and plate (R-C 55-60)
    • Stainless steel shaft
    • Stainless steel lifting bail
    • Corrosion-resistant, powder coated epoxy paint
    • 20′ (6 m) power cord, 20′ (6 m) sensor cord
    • UL listed
    • Options:
      • Extended cord lengths
      • Anti-siphon device
    • 1 year limited warranty

     

    Notes

    **Requires circuit in control panel to function. Reversible feature only available on X840 models.
    Patent No. 6,364,620

  • Product Specifications

     

    Motor 2 HP
    Voltage 200 – 575 V
    Phase 1 or 3 Ph
    Hertz 60 Hz
    RPM 3450 RPM
    Type Capacitor start / capacitor run or 3 phase
    Insulation Class F
    Amps 4.5 – 20.0 Amps
    Operation Nonautomatic
    Discharge Size 1-1/4″ NPT vertical
    Cord Length 20′ (6 m) standard
    Cord Type UL listed, SOOW
    Max Head 125′ (38.1 m)
    Max Flow Rate 59 GPM (223 LPM)
    Max Operating Temperature 104 °F (40 °C)
    Cooling Oil filled
    Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
    Cap Cast iron
    Motor Housing Cast iron
    Pump Housing Cast iron
    Base Cast iron
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic with stainless steel parts
    Impeller Type Non-clogging vortex
    Impeller Bronze
    Hardware Stainless steel
    Motor Shaft 416 stainless steel
     

    Powder Coated Tough      SWPA      CSA

  • Literature

    Warning

    Not for use in acidic, methanol or ethyl acetate atmospheres.

    Model Comparison Charts

    • Product Model Comparison Chart: 60hz
      model seal mode volts phase amps hp hz lbs kg
      IX840 Single Non 200 1 20.0 2 60 155 70
      IX841 Single Non 200 1 20.0 2 60 155 70
      IX842 Single Non 200 1 20.0 2 60 155 70
      EX840 Single Non 230 1 17.2 2 60 155 70
      EX841 Single Non 230 1 17.2 2 60 155 70
      EX842 Single Non 230 1 17.2 2 60 155 70
      JX840 Single Non 200 3 12.3 2 60 155 70
      JX841 Single Non 200 3 12.3 2 60 155 70
      JX842 Single Non 200 3 12.3 2 60 155 70
      FX840 Single Non 230 3 10.8 2 60 155 70
      FX841 Single Non 230 3 10.8 2 60 155 70
      FX842 Single Non 230 3 10.8 2 60 155 70
      GX840 Single Non 460 3 5.5 2 60 155 70
      GX841 Single Non 460 3 5.5 2 60 155 70
      GX842 Single Non 460 3 5.5 2 60 155 70
      BAX840 Single Non 575 3 4.5 2 60 155 70
      BAX841 Single Non 575 3 4.5 2 60 155 70
      BAX842 Single Non 575 3 4.5 2 60 155 70

    –>

     

    –>

     

    <!–

    –>
    BIM, Revit, X840
    <!–

    –>

     

  • Packages and Accessories
  • cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
  • Tested to FM standards 3600 and 3615 by CSA
  • Finned, Class 30, cast iron construction
  • Corrosion-resistant, powder coated epoxy finish
  • Discharge size: 1-1/4″ NPT
  • 20′ (6 m) cord length
  • Oil-filled, hermetically-sealed motor with Class F insulation
  • Hardened stainless steel cutter and disc, Rockwell C55-60
  • Bronze vortex impeller
  • Upper and lower ball bearing construction
  • Stainless steel screws, bolts and lifting bail
  • Dual mechanical seals with leak detection
  • Automatic thermal overload protection (1 Ph)
  • Thermal sensor protection (3 Ph)
  • Legs provide for free-standing installation
  • Preassembled systems available
  • Threaded conduit connection on pump cap to provide protection to power cord and sensor wires
  • Reversible cutter action (manual/auto**)
  • 1-1/4″ NPT vertical discharge
  • Carbon/ceramic tandem seals
  • Thermal sensors** (overload on 1 Ph)
  • Moisture probes**
  • Balanced bronze impellers
  • Stainless steel cutter and plate (R-C 55-60)
  • Stainless steel shaft
  • Stainless steel lifting bail
  • Corrosion-resistant, powder coated epoxy paint
  • 20′ (6 m) power cord, 20′ (6 m) sensor cord
  • UL listed
  • Options:
    • Extended cord lengths
    • Anti-siphon device
  • 1 year limited warranty

 

Notes

**Requires circuit in control panel to function. Reversible feature only available on X840 models.
Patent No. 6,364,620

 

Motor 2 HP
Voltage 200 – 575 V
Phase 1 or 3 Ph
Hertz 60 Hz
RPM 3450 RPM
Type Capacitor start / capacitor run or 3 phase
Insulation Class F
Amps 4.5 – 20.0 Amps
Operation Nonautomatic
Discharge Size 1-1/4″ NPT vertical
Cord Length 20′ (6 m) standard
Cord Type UL listed, SOOW
Max Head 125′ (38.1 m)
Max Flow Rate 59 GPM (223 LPM)
Max Operating Temperature 104 °F (40 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Cast iron
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic with stainless steel parts
Impeller Type Non-clogging vortex
Impeller Bronze
Hardware Stainless steel
Motor Shaft 416 stainless steel
 

Powder Coated Tough      SWPA      CSA

Warning

Not for use in acidic, methanol or ethyl acetate atmospheres.

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    IX840 Single Non 200 1 20.0 2 60 155 70
    IX841 Single Non 200 1 20.0 2 60 155 70
    IX842 Single Non 200 1 20.0 2 60 155 70
    EX840 Single Non 230 1 17.2 2 60 155 70
    EX841 Single Non 230 1 17.2 2 60 155 70
    EX842 Single Non 230 1 17.2 2 60 155 70
    JX840 Single Non 200 3 12.3 2 60 155 70
    JX841 Single Non 200 3 12.3 2 60 155 70
    JX842 Single Non 200 3 12.3 2 60 155 70
    FX840 Single Non 230 3 10.8 2 60 155 70
    FX841 Single Non 230 3 10.8 2 60 155 70
    FX842 Single Non 230 3 10.8 2 60 155 70
    GX840 Single Non 460 3 5.5 2 60 155 70
    GX841 Single Non 460 3 5.5 2 60 155 70
    GX842 Single Non 460 3 5.5 2 60 155 70
    BAX840 Single Non 575 3 4.5 2 60 155 70
    BAX841 Single Non 575 3 4.5 2 60 155 70
    BAX842 Single Non 575 3 4.5 2 60 155 70

–>

 

–>

 

<!–

–>
BIM, Revit, X840
<!–

–>