Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE
Specialty Products

X290 Series Sewage Pumps

X290 Series Sewage Pumps

Hazardous Location Pumps

Submersible effluent or dewatering pumps with explosion-proof motors.

Find Nearest Distributor

Featured Video



  • Features and Benefits
    • cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
    • Tested to FM standards 3600 and 3615 by CSA
    • Automatic or non-automatic. Automatic units Patent No. 8,535,014
    • Non-clogging cast iron vortex impeller
    • Stainless steel bolts, handle, guard and float rod guide, switch arm and actuator assembly
    • Brass float and float rod (automatic only)
    • Durable, cast construction. Cast iron cover, motor adapter and pump housing. No sheet metal parts to rust or corrode. All cast iron class 30, 30000# tensile strength.
    • Stainless steel screws and handle
    • 20′ (6 m), UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) neoprene cord. Extra cord lengths available in 25′, 35′ and 50′ (8 m, 11 m and 15 m) length only. Sensor leads and power leads in one cord for easy installation.
    • Threaded conduit connection for protecting cords in extra heavy-duty applications: 1-1/2″ NPT.
    • Moisture sensors pre-wired in motor housing (functionality requires indicator circuit in panel)
    • Zoeller control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units
    • Simplex seal-fail panel #10-1031 available for automatic units
    • 3 Ph models available as non-automatic only
    • Motor – 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected (3 Ph requires circuit in control panel)
    • Maximum temperature for sewage or dewatering: 104 °F (40 °C)
    • Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
    • Upper ball bearing and lower ball bearing running in bath of oil
    • Neoprene square ring seals
    • All models pass 2” (50 mm) spherical solids
    • Major width: 13-5/16″ (33.8 cm)
    • Height: 23-9/32″ (59.1 cm) (nonauto), 24-15/16″ (63.3 cm) (auto)
    • When ordering, specify 2” or 3” NPT female flanged vertical discharge
    • 100% computerized testing and 100% tested submerged in water
    • Corrosion-resistant, powder coated epoxy finish
    • 1 year limited warranty

    Notes

    The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

    Automatic units Patent No. 8,535,014

    Reserve powered design.
    For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

    *See charts for FM listings.

  • Product Specifications

     

    Motor 1/2 – 2 HP
    Voltage 115 – 575 V
    Phase 1 or 3 Ph
    Hertz 60 Hz
    RPM 3450 RPM
    Type Permanent split capacitor or 3 phase
    Insulation Class B
    Amps 2.4 – 20.5 Amps
    Operation Automatic or nonautomatic
    Auto On / Off Points 19-1/2″ / 9-3/4″ (49.5 cm / 24.8 cm)
    Discharge Size 2″ or 3″ NPT
    Solids Handling 2″ (50 mm) spherical solids
    Cord Length 20′ (6 m) standard
    Cord Type UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord
    Max Head 75′ (22.9 m)
    Max Flow Rate 214 GPM (810 LPM)
    Max Operating Temperature 104 °F (40 °C)
    Cooling Oil filled with finned housings
    Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
    Cap Cast iron
    Motor Housing Cast iron
    Pump Housing Cast iron
    Base Cast iron
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic with stainless steel parts
    Impeller Type Non-clogging vortex
    Impeller Cast iron
    Hardware Stainless steel or brass
    Motor Shaft 416 stainless steel
     

    Powder Coated Tough      SSPMA      CSA
  • Literature

    Warning

    Not for use in acidic, methanol or ethyl acetate atmospheres.

    Technical Support Literature

    Sales Literature

    Model Comparison Charts

    • Product Model Comparison Chart: 60hz
      model seal mode volts phase amps hp hz lbs kg
      MX292 Single Auto 115 1 15.0 1/2 60 123 55
      NX292 Single Non 115 1 15.0 1/2 60 118 53
      BAX292 Single Non 575 3 2.4 1/2 60 121 54
      DX293 Single Auto 230 1 10.2 1 60 123 55
      EX293 Single Non 230 1 10.2 1 60 118 53
      HX293 Single Auto 200 1 12.0 1 60 123 55
      IX293 Single Non 200 1 12.0 1 60 121 54
      FX293 Single Non 230 3 7.6 1 60 121 54
      JX293 Single Non 200 3 4.6 1 60 121 54
      GX293 Single Non 460 3 4.0 1 60 121 54
      BAX293 Single Non 575 3 3.3 1 60 121 54
      DX294 Single Auto 230 1 13.7 1-1/2 60 128 58
      EX294 Single Non 230 3 13.7 1-1/2 60 121 54
      HX294 Single Auto 200 1 17.8 1-1/2 60 128 58
      IX294 Single Non 200 1 17.8 1-1/2 60 121 54
      FX294 Single Non 230 3 9.5 1-1/2 60 121 54
      JX294 Single Non 200 3 10.8 1-1/2 60 121 54
      GX294 Single Non 460 3 4.8 1-1/2 60 121 54
      BAX294 Single Non 575 3 3.8 1-1/2 60 121 54
      DX295 Single Auto 230 1 17.1 2 60 128 58
      EX295 Single Non 230 1 17.1 2 60 121 54
      HX295 Single Auto 200 1 20.5 2 60 128 58
      IX295 Single Non 200 1 20.5 2 60 121 54
      FX295 Single Non 230 3 12.2 2 60 121 54
      JX295 Single Non 200 3 14.3 2 60 121 54
      GX295 Single Non 460 3 6.1 2 60 121 54
      BAX295 Single Non 575 3 4.9 2 60 121 54

    Pump Performance Curves

    Design Tools

    Dimensional Drawing, X290 Series, Automatic SK2508

    Dimensional Drawing, Model X290. SK2508

    Dimensional Drawing, Model X290. SK2508

    Dimensional Drawing, X290 Series, Nonautomatic 60 Hz SK1914

    Dimensional Drawing, Model X290, SK1914

    Dimensional Drawing, Model X290, SK1914



    Wiring Diagram, Hazardous Location FM1973: 60 Hz

     

  • Packages and Accessories

    Accessories

  • cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
  • Tested to FM standards 3600 and 3615 by CSA
  • Automatic or non-automatic. Automatic units Patent No. 8,535,014
  • Non-clogging cast iron vortex impeller
  • Stainless steel bolts, handle, guard and float rod guide, switch arm and actuator assembly
  • Brass float and float rod (automatic only)
  • Durable, cast construction. Cast iron cover, motor adapter and pump housing. No sheet metal parts to rust or corrode. All cast iron class 30, 30000# tensile strength.
  • Stainless steel screws and handle
  • 20′ (6 m), UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) neoprene cord. Extra cord lengths available in 25′, 35′ and 50′ (8 m, 11 m and 15 m) length only. Sensor leads and power leads in one cord for easy installation.
  • Threaded conduit connection for protecting cords in extra heavy-duty applications: 1-1/2″ NPT.
  • Moisture sensors pre-wired in motor housing (functionality requires indicator circuit in panel)
  • Zoeller control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units
  • Simplex seal-fail panel #10-1031 available for automatic units
  • 3 Ph models available as non-automatic only
  • Motor – 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected (3 Ph requires circuit in control panel)
  • Maximum temperature for sewage or dewatering: 104 °F (40 °C)
  • Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
  • Upper ball bearing and lower ball bearing running in bath of oil
  • Neoprene square ring seals
  • All models pass 2” (50 mm) spherical solids
  • Major width: 13-5/16″ (33.8 cm)
  • Height: 23-9/32″ (59.1 cm) (nonauto), 24-15/16″ (63.3 cm) (auto)
  • When ordering, specify 2” or 3” NPT female flanged vertical discharge
  • 100% computerized testing and 100% tested submerged in water
  • Corrosion-resistant, powder coated epoxy finish
  • 1 year limited warranty

Notes

The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

Automatic units Patent No. 8,535,014

Reserve powered design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

*See charts for FM listings.

 

Motor 1/2 – 2 HP
Voltage 115 – 575 V
Phase 1 or 3 Ph
Hertz 60 Hz
RPM 3450 RPM
Type Permanent split capacitor or 3 phase
Insulation Class B
Amps 2.4 – 20.5 Amps
Operation Automatic or nonautomatic
Auto On / Off Points 19-1/2″ / 9-3/4″ (49.5 cm / 24.8 cm)
Discharge Size 2″ or 3″ NPT
Solids Handling 2″ (50 mm) spherical solids
Cord Length 20′ (6 m) standard
Cord Type UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord
Max Head 75′ (22.9 m)
Max Flow Rate 214 GPM (810 LPM)
Max Operating Temperature 104 °F (40 °C)
Cooling Oil filled with finned housings
Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Cast iron
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic with stainless steel parts
Impeller Type Non-clogging vortex
Impeller Cast iron
Hardware Stainless steel or brass
Motor Shaft 416 stainless steel
 

Powder Coated Tough      SSPMA      CSA

Warning

Not for use in acidic, methanol or ethyl acetate atmospheres.

Technical Support Literature

Sales Literature

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    MX292 Single Auto 115 1 15.0 1/2 60 123 55
    NX292 Single Non 115 1 15.0 1/2 60 118 53
    BAX292 Single Non 575 3 2.4 1/2 60 121 54
    DX293 Single Auto 230 1 10.2 1 60 123 55
    EX293 Single Non 230 1 10.2 1 60 118 53
    HX293 Single Auto 200 1 12.0 1 60 123 55
    IX293 Single Non 200 1 12.0 1 60 121 54
    FX293 Single Non 230 3 7.6 1 60 121 54
    JX293 Single Non 200 3 4.6 1 60 121 54
    GX293 Single Non 460 3 4.0 1 60 121 54
    BAX293 Single Non 575 3 3.3 1 60 121 54
    DX294 Single Auto 230 1 13.7 1-1/2 60 128 58
    EX294 Single Non 230 3 13.7 1-1/2 60 121 54
    HX294 Single Auto 200 1 17.8 1-1/2 60 128 58
    IX294 Single Non 200 1 17.8 1-1/2 60 121 54
    FX294 Single Non 230 3 9.5 1-1/2 60 121 54
    JX294 Single Non 200 3 10.8 1-1/2 60 121 54
    GX294 Single Non 460 3 4.8 1-1/2 60 121 54
    BAX294 Single Non 575 3 3.8 1-1/2 60 121 54
    DX295 Single Auto 230 1 17.1 2 60 128 58
    EX295 Single Non 230 1 17.1 2 60 121 54
    HX295 Single Auto 200 1 20.5 2 60 128 58
    IX295 Single Non 200 1 20.5 2 60 121 54
    FX295 Single Non 230 3 12.2 2 60 121 54
    JX295 Single Non 200 3 14.3 2 60 121 54
    GX295 Single Non 460 3 6.1 2 60 121 54
    BAX295 Single Non 575 3 4.9 2 60 121 54

Pump Performance Curves

Design Tools

Dimensional Drawing, X290 Series, Automatic SK2508

Dimensional Drawing, Model X290. SK2508

Dimensional Drawing, Model X290. SK2508

Dimensional Drawing, X290 Series, Nonautomatic 60 Hz SK1914

Dimensional Drawing, Model X290, SK1914

Dimensional Drawing, Model X290, SK1914



Wiring Diagram, Hazardous Location FM1973: 60 Hz

 

Accessories