Home > Effluent Pumps > X180, X190 Series Effluent Pumps

X180, X190 Series Effluent Pumps

Effluent Pumps

Submersible effluent or dewatering pumps with explosion-proof motors.

Find Nearest Distributor

Featured Video

Features and Benefits
- cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
- Tested to FM standards 3600 and 3615 by CSA
- Automatic or non-automatic. Automatic units Patent No. 8,535,014
- Non-clogging vortex impeller design, Cast Iron
- Stainless steel rotor shaft
- Sensor leads and power leads in one cord for easy installation
- Durable cast iron (class 30, 30000# tensile strength) constructed cover, motor adapter and pump housing
- Threaded conduit connection for protecting cords in extra heavy duty applications- 1-1/4” NPT (nonauto), 1-1/2″ NPT (auto)
- Stainless steel plate, bolts, handle, guard and float rod guide, switch arm and actuator assembly
- Brass float and float rod (automatic only)
- Moisture sensors pre-wired in motor housing (functionality requires indicator circuit in panel)
- Zoeller control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units.
- Simplex seal-fail panel #10-1031 available for automatic units.
- 3 Ph models available as non-automatic only
- Oil-filled, hermetically-sealed motor, automatic reset thermal overload protected (3 Ph requires circuit in control panel)
- Maximum temperature for effluent or dewatering: 104 °F (40 °C)
- Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
- Upper ball bearing and lower ball bearing running in bath of oil
- Neoprene square ring seals
- All X180 models pass 3/4” (19 mm) spherical solids
- Model X191 pump passes 5/8” (15 mm) spherical solids
- Major width: 13-5/16″ (33.8 cm)
- Major height: 22″ (55.9 cm) (nonauto), 23-9/32″ (59.1 cm) (auto)
- On point: 19-1/2″ (49.5 cm)
- Off point: 9-3/4″ (24.8 cm) (automatic)
- 1-1/2” NPT discharge standard, 2” and 3” NPT flange available
- 100% submerged and computerized tested
- Corrosion-resistant, powder-coated epoxy finish
- 1 year limited warranty

Product Specifications

Motor	1 – 2 HP
Voltage	200 – 575 V
Phase	1 or 3 Ph
Hertz	60 Hz
RPM	3450 RPM
Type	Permanent split capacitor or 3 phase
Insulation	Class B
Amps	3.3 – 20.5 Amps
Operation	Automatic or nonautomatic
Auto On / Off Points	19-1/2″ / 9-3/4″ (49.5 cm / 24.8 cm)
Discharge Size	1-1/2″ NPT (optional 2″ or 3″ flange available)
Solids Handling	3/4″ (19 mm) X180 series, 5/8″ (15 mm) X190 series, spherical solids
Cord Length	20′ (6 m) standard
Cord Type	UL listed 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord
Max Head	137′ (42 m)
Max Flow Rate	145 GPM (549 LPM)
Max Operating Temperature	104 °F (40 °C)
Cooling	Oil filled
Motor Protection	Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
Cap	Cast iron
Motor Housing	Cast iron
Pump Housing	Cast iron
Base	Cast iron
Upper Bearing	Ball bearing
Lower Bearing	Ball bearing
Mechanical Seals	Carbon and ceramic with stainless steel parts
Impeller Type	Non-clogging vortex
Impeller	Bronze
Hardware	Stainless steel or brass
Motor Shaft	416 Stainless steel

Literature

Automatic pumps: Use the seal failure panel (10-1031) to enable the moisture sensor circuit if required by local codes.

Technical Support Literature

Sales Literature

Model Comparison Charts

Product Model Comparison Chart: 60hz

model	seal	mode	volts	phase	amps	hp	hz	lbs	kg
DX185	Single	Auto	230	1	9.8	1	60	124	56
EX185	Single	Non	230	1	9.8	1	60	116	52
HX185	Single	Auto	200	1	11.5	1	60	124	56
JX185	Single	Non	200	1	11.5	1	60	119	53
FX185	Single	Non	230	3	7.4	1	60	119	53
JX185	Single	Non	200	3	7.5	1	60	119	53
GX185	Single	Non	460	3	3.7	1	60	119	53
BAX185	Single	Non	575	3	3.3	1	60	119	53
DX186	Single	Auto	230	1	13.7	1-1/2	60	128	58
EX186	Single	Non	230	1	13.7	1-1/2	60	126	57
HX186	Single	Auto	200	1	17.2	1-1/2	60	126	57
IX186	Single	Non	200	1	17.2	1-1/2	60	126	57
FX186	Single	Non	230	3	9.2	1-1/2	60	126	57
JX186	Single	Non	200	3	10.3	1-1/2	60	126	57
GX186	Single	Non	460	3	4.6	1-1/2	60	126	57
DX188	Single	Auto	230	1	14.0	1-1/2	60	128	58
EX188	Single	Non	230	1	14.0	1-1/2	60	126	57
HX188	Single	Auto	200	1	16.8	1-1/2	60	128	58
IX188	Single	Non	200	1	16.8	1-1/2	60	126	57
FX188	Single	Non	230	3	8.9	1-1/2	60	126	57
JX188	Single	Non	200	3	10.3	1-1/2	60	126	57
GX188	Single	Non	460	3	4.6	1-1/2	60	126	57
BAX188	Single	Non	575	3	3.5	1-1/2	60	126	57
DX189	Single	Auto	230	1	17.1	2	60	128	58
EX189	Single	Non	230	1	17.1	2	60	126	57
HX189	Single	Auto	200	1	20.5	2	60	128	58
IX189	Single	Non	200	1	20.5	2	60	126	57
FX189	Single	Non	230	3	11.2	2	60	126	57
JX189	Single	Non	200	3	13.2	2	60	126	57
GX189	Single	Non	460	3	6.0	2	60	126	57
BAX189	Single	Non	575	3	5.8	2	60	126	57
DX191	Single	Auto	230	1	14.5	2	60	128	58
EX191	Single	Non	230	1	14.5	2	60	129	58

Pump Performance Curves

Design Tools

Packages and Accessories
Accessories
- Piggyback Variable Level Float Switch
- Mechanical Switch
- Control Panels for Explosion Proof Pumps

cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
Tested to FM standards 3600 and 3615 by CSA
Automatic or non-automatic. Automatic units Patent No. 8,535,014
Non-clogging vortex impeller design, Cast Iron
Stainless steel rotor shaft
Sensor leads and power leads in one cord for easy installation
Durable cast iron (class 30, 30000# tensile strength) constructed cover, motor adapter and pump housing
Threaded conduit connection for protecting cords in extra heavy duty applications- 1-1/4” NPT (nonauto), 1-1/2″ NPT (auto)
Stainless steel plate, bolts, handle, guard and float rod guide, switch arm and actuator assembly
Brass float and float rod (automatic only)
Moisture sensors pre-wired in motor housing (functionality requires indicator circuit in panel)
Zoeller control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units.
Simplex seal-fail panel #10-1031 available for automatic units.
3 Ph models available as non-automatic only
Oil-filled, hermetically-sealed motor, automatic reset thermal overload protected (3 Ph requires circuit in control panel)
Maximum temperature for effluent or dewatering: 104 °F (40 °C)
Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
Upper ball bearing and lower ball bearing running in bath of oil
Neoprene square ring seals
All X180 models pass 3/4” (19 mm) spherical solids
Model X191 pump passes 5/8” (15 mm) spherical solids
Major width: 13-5/16″ (33.8 cm)
Major height: 22″ (55.9 cm) (nonauto), 23-9/32″ (59.1 cm) (auto)
On point: 19-1/2″ (49.5 cm)
Off point: 9-3/4″ (24.8 cm) (automatic)
1-1/2” NPT discharge standard, 2” and 3” NPT flange available
100% submerged and computerized tested
Corrosion-resistant, powder-coated epoxy finish
1 year limited warranty

Motor	1 – 2 HP
Voltage	200 – 575 V
Phase	1 or 3 Ph
Hertz	60 Hz
RPM	3450 RPM
Type	Permanent split capacitor or 3 phase
Insulation	Class B
Amps	3.3 – 20.5 Amps
Operation	Automatic or nonautomatic
Auto On / Off Points	19-1/2″ / 9-3/4″ (49.5 cm / 24.8 cm)
Discharge Size	1-1/2″ NPT (optional 2″ or 3″ flange available)
Solids Handling	3/4″ (19 mm) X180 series, 5/8″ (15 mm) X190 series, spherical solids
Cord Length	20′ (6 m) standard
Cord Type	UL listed 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord
Max Head	137′ (42 m)
Max Flow Rate	145 GPM (549 LPM)
Max Operating Temperature	104 °F (40 °C)
Cooling	Oil filled
Motor Protection	Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
Cap	Cast iron
Motor Housing	Cast iron
Pump Housing	Cast iron
Base	Cast iron
Upper Bearing	Ball bearing
Lower Bearing	Ball bearing
Mechanical Seals	Carbon and ceramic with stainless steel parts
Impeller Type	Non-clogging vortex
Impeller	Bronze
Hardware	Stainless steel or brass
Motor Shaft	416 Stainless steel