Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE
Specialty Products

X160 Series Effluent Pumps

X160 Series Effluent Pumps

Effluent Pumps

Submersible effluent or dewatering pumps with explosion-proof motors.

Find Nearest Distributor

Featured Video



  • Features and Benefits
    • cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
    • Tested to FM standards 3600 and 3615 by CSA
    • Automatic or nonautomatic. Automatic units Patent No. 8,535,014
    • WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres
    • Non-clogging vortex impeller design, Cast Iron
    • Stainless steel rotor shaft
    • Durable, cast construction: cast iron cover, motor adapter and pump housing. All cast iron class 30, 30000# tensile strength
    • 20′ (6 m), UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) neoprene cord. Extra cord lengths available in 25′, 35′ and 50′ (8, 11 and 15 m) only. Sensor leads and power leads in one cord for easy installation.
    • Stainless steel plate, bolts, handle, guard and float rod, guide, switch arm and actuator assembly
    • Brass float and float rod (automatic only)
    • Threaded conduit connection for protecting cords in extra heavy-duty applications: 1-1/2″ NPT
    • Moisture sensors pre-wired in motor housing (functionality requires indicator in panel)
    • Zoeller control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units
    • 3 Ph models available as non-automatic only
    • Simplex seal-fail panel (P/N 10-1031) available for automatic units
    • Motor: 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected (3 Ph requires circuit in control panel)
    • Maximum temperature for effluent or dewatering: 104 °F (40 °C)
    • Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
    • Upper ball bearing and lower ball bearing running in bath of oil
    • Neoprene square ring seals
    • All models pass 3/4” (19 mm) spherical solids
    • Major width: 13 5/16″ (33.8 cm)
    • Major height: 23 9/32″ (59.1 cm) [nonauto], 24-15/16″ (63.3 cm) [auto]
    • On point: 19-1/2″ (49.5 cm) [auto]
    • Off point: 9-3/4″ (24.8 cm) [auto]
    • 1-1/2” NPT discharge standard, 2” and 3” NPT flange available
    • 100% computerized testing and 100% tested submerged in water
    • Corrosion-resistant, powder coated epoxy finish with stainless steel screws and handle
    • 1 year limited warranty

    Notes

    Product may not be exactly as pictured.

    The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

    Automatic units Patent No. 8,535,014

    Reserve powered design.
    For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

    *See charts for FM listings.
    ** Use optional model 10-1031 seal failure panel to enable moisture sensor circuit on automatic pump models

  • Product Specifications

     

    Motor 1/2 – 1 HP
    Voltage 115 – 575 V
    Phase 1 or 3 Ph
    Hertz 60 Hz
    RPM 3450 RPM
    Type Permanent split capacitor or 3 phase
    Insulation Class B
    Amps 2.4 – 15.5 Amps
    Operation Automatic or nonautomatic
    Auto On / Off Points 19-1/2″ / 9-3/4″ (49.5 cm / 24.8 cm)
    Discharge Size 1-1/2″ NPT (optional 2″ or 3″ flange available)
    Solids Handling 3/4″ (19 mm) spherical solids
    Cord Length 20′ (6 m) standard
    Cord Type UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord
    Max Head 86.5′ (26 m)
    Max Flow Rate 100 GPM (379 LPM)
    Max Operating Temperature 104 °F (40 °C)
    Cooling Oil filled
    Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
    Cap Cast iron
    Motor Housing Cast iron
    Pump Housing Cast iron
    Base Cast iron
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic with stainless steel parts
    Impeller Type Non-clogging vortex
    Impeller Bronze
    Hardware Stainless steel or brass
    Motor Shaft 416 stainless steel
     

    Powder Coated Tough      SSPMA      CSA
  • Literature

    Technical Support Literature

    Sales Literature

    Model Comparison Charts

    • Product Model Comparison Chart: 60hz
      model seal mode volts phase amps hp hz lbs kg
      MX161 Single Auto 115 1 15.5 1/2 60 123 55
      NX161 Single Non 115 1 15.5 1/2 60 114 51
      DX161 Single Auto 230 1 7.5 1/2 60 123 55
      EX161 Single Non 230 1 7.5 1/2 60 114 51
      HX161 Single Auto 200 1 8.8 1/2 60 123 55
      IX161 Single Non 200 1 8.8 1/2 60 117 53
      JX161 Single Non 200 3 6.4 1/2 60 117 53
      FX161 Single Non 230 3 5.2 1/2 60 117 53
      GX161 Single Non 460 3 2.9 1/2 60 117 53
      BAX161 Single Non 575 3 2.4 1/2 60 117 53
      MX163 Single Auto 115 1 15.0 1/2 60 123 55
      NX163 Single Non 115 1 15.0 1/2 60 114 51
      DX163 Single Auto 230 1 7.5 1/2 60 123 55
      EX163 Single Auto 230 1 7.5 1/2 60 117 53
      HX163 Single Auto 200 1 8.5 1/2 60 123 55
      IX163 Single Non 200 1 8.5 1/2 60 117 53
      JX163 Single Non 200 3 6.0 1/2 60 117 53
      FX163 Single Non 230 3 4.8 1/2 60 117 53
      GX163 Single Non 460 3 2.9 1/2 60 117 53
      BAX163 Single Non 575 3 2.4 1/2 60 117 53
      DX165 Single Auto 230 1 10.2 1 60 124 56
      EX165 Single Non 230 1 10.2 1 60 114 51
      HX165 Single Auto 200 1 12.6 1 60 124 56
      IX165 Single Non 200 1 12.6 1 60 117 53
      JX165 Single Non 200 3 7.5 1 60 117 53
      FX165 Single Non 230 3 7.4 1 60 117 53
      GX165 Single Non 460 3 3.7 1 60 117 53
      BAX165 Single Non 575 3 3.0 1 60 117 53

    Pump Performance Curves

    Design Tools

  • Packages and Accessories

    Accessories

  • cCSAus rated Class I, Division 1, Groups C & D and Class Zone 1, Groups IIA & IIB Construction
  • Tested to FM standards 3600 and 3615 by CSA
  • Automatic or nonautomatic. Automatic units Patent No. 8,535,014
  • WARNING: Not for use in acidic, methanol, or ethyl acetate atmospheres
  • Non-clogging vortex impeller design, Cast Iron
  • Stainless steel rotor shaft
  • Durable, cast construction: cast iron cover, motor adapter and pump housing. All cast iron class 30, 30000# tensile strength
  • 20′ (6 m), UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) neoprene cord. Extra cord lengths available in 25′, 35′ and 50′ (8, 11 and 15 m) only. Sensor leads and power leads in one cord for easy installation.
  • Stainless steel plate, bolts, handle, guard and float rod, guide, switch arm and actuator assembly
  • Brass float and float rod (automatic only)
  • Threaded conduit connection for protecting cords in extra heavy-duty applications: 1-1/2″ NPT
  • Moisture sensors pre-wired in motor housing (functionality requires indicator in panel)
  • Zoeller control panel with intrinsically-safe relays and moisture indicator is required with non-automatic units
  • 3 Ph models available as non-automatic only
  • Simplex seal-fail panel (P/N 10-1031) available for automatic units
  • Motor: 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected (3 Ph requires circuit in control panel)
  • Maximum temperature for effluent or dewatering: 104 °F (40 °C)
  • Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
  • Upper ball bearing and lower ball bearing running in bath of oil
  • Neoprene square ring seals
  • All models pass 3/4” (19 mm) spherical solids
  • Major width: 13 5/16″ (33.8 cm)
  • Major height: 23 9/32″ (59.1 cm) [nonauto], 24-15/16″ (63.3 cm) [auto]
  • On point: 19-1/2″ (49.5 cm) [auto]
  • Off point: 9-3/4″ (24.8 cm) [auto]
  • 1-1/2” NPT discharge standard, 2” and 3” NPT flange available
  • 100% computerized testing and 100% tested submerged in water
  • Corrosion-resistant, powder coated epoxy finish with stainless steel screws and handle
  • 1 year limited warranty

Notes

Product may not be exactly as pictured.

The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

Automatic units Patent No. 8,535,014

Reserve powered design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

*See charts for FM listings.
** Use optional model 10-1031 seal failure panel to enable moisture sensor circuit on automatic pump models

 

Motor 1/2 – 1 HP
Voltage 115 – 575 V
Phase 1 or 3 Ph
Hertz 60 Hz
RPM 3450 RPM
Type Permanent split capacitor or 3 phase
Insulation Class B
Amps 2.4 – 15.5 Amps
Operation Automatic or nonautomatic
Auto On / Off Points 19-1/2″ / 9-3/4″ (49.5 cm / 24.8 cm)
Discharge Size 1-1/2″ NPT (optional 2″ or 3″ flange available)
Solids Handling 3/4″ (19 mm) spherical solids
Cord Length 20′ (6 m) standard
Cord Type UL listed, 5-wire (1 Ph) or 8-wire (3 Ph) SOOW cord
Max Head 86.5′ (26 m)
Max Flow Rate 100 GPM (379 LPM)
Max Operating Temperature 104 °F (40 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Cast iron
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic with stainless steel parts
Impeller Type Non-clogging vortex
Impeller Bronze
Hardware Stainless steel or brass
Motor Shaft 416 stainless steel
 

Powder Coated Tough      SSPMA      CSA

Technical Support Literature

Sales Literature

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    MX161 Single Auto 115 1 15.5 1/2 60 123 55
    NX161 Single Non 115 1 15.5 1/2 60 114 51
    DX161 Single Auto 230 1 7.5 1/2 60 123 55
    EX161 Single Non 230 1 7.5 1/2 60 114 51
    HX161 Single Auto 200 1 8.8 1/2 60 123 55
    IX161 Single Non 200 1 8.8 1/2 60 117 53
    JX161 Single Non 200 3 6.4 1/2 60 117 53
    FX161 Single Non 230 3 5.2 1/2 60 117 53
    GX161 Single Non 460 3 2.9 1/2 60 117 53
    BAX161 Single Non 575 3 2.4 1/2 60 117 53
    MX163 Single Auto 115 1 15.0 1/2 60 123 55
    NX163 Single Non 115 1 15.0 1/2 60 114 51
    DX163 Single Auto 230 1 7.5 1/2 60 123 55
    EX163 Single Auto 230 1 7.5 1/2 60 117 53
    HX163 Single Auto 200 1 8.5 1/2 60 123 55
    IX163 Single Non 200 1 8.5 1/2 60 117 53
    JX163 Single Non 200 3 6.0 1/2 60 117 53
    FX163 Single Non 230 3 4.8 1/2 60 117 53
    GX163 Single Non 460 3 2.9 1/2 60 117 53
    BAX163 Single Non 575 3 2.4 1/2 60 117 53
    DX165 Single Auto 230 1 10.2 1 60 124 56
    EX165 Single Non 230 1 10.2 1 60 114 51
    HX165 Single Auto 200 1 12.6 1 60 124 56
    IX165 Single Non 200 1 12.6 1 60 117 53
    JX165 Single Non 200 3 7.5 1 60 117 53
    FX165 Single Non 230 3 7.4 1 60 117 53
    GX165 Single Non 460 3 3.7 1 60 117 53
    BAX165 Single Non 575 3 3.0 1 60 117 53

Pump Performance Curves

Design Tools

Accessories