Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

Qwik Jon® Ultima 204


Qwik Jon® Ultima 204

Qwik Jon Upflush Systems


Economical lavatory and shower system designed for free-standing or built-in installation

  • Features and Benefits

    Install a Qwik Jon® Ultima just about anywhere

    • Contains 1/2 HP mini-grinder pump
    • Dual cutting action provides over 70,000 cuts per minute (50 Hz: 60,000 cuts per minute), greatly reducing the potential for clogging and increasing pump reliability.
    • Preassembled pump and tank for easy installation
    • No need to destroy concrete floors
    • No need to elevate floor
    • Designed to accommodate a lavatory, bathtub and/or shower
    • Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
    • Reduces construction costs
    • 1” discharge (can be reduced to 3/4” to replace existing systems)
    • Pumps any direction
    • Can be installed either free-standing or behind a wall with the 2” MPT or 1-1/2” internal slip side inlets

    Pump features

    • Automatic level control switch
    • Thermal overload protected motor
    • Stainless steel screws, bolts and handle
    • Non-clogging vortex impeller
    • UL listed, 3-wire, neoprene 9′ (3m) cord and plug
    • Maximum temperature 130 °F (54 °C)
    • 1 year limited warranty

    Tank features

    • Durable ABS tank with white finish
    • Light-weight
    • Built-in check valve

    Items included

    • Tank, lid and gasket
    • 1/2 HP mini-grinder pump
    • Back-flow device (check local codes)
    • 1” discharge and 1-1/2” vent
    • Hardware pack
    • Installation instructions
    • Shipping weight: 33 lbs (15Kg)

    Items needed by installer

    • Supply fittings and waste pipe
    • Electrical source with ground fault interrupter (GFCI) protected receptacle
    • Water supply
    • Tools

    Notes
    Patent Nos. 7,203,976; 2,512,023; 9,352,327; 8,562,287

    These pumps not designed for use in any other application.

  • Product Specifications

     

    Motor 1/2 HP
    Hertz 60 Hz
    Discharge Size 1″
    Cord Length 9′ (3 m)
    Cord Type UL listed, 3-wire neoprene cord and plug
    Max Operating Temperature 130 °F (54 °C)
    Motor Protection Thermal overload
    Impeller Type Non-clogging vortex
    Impeller Stainless steel
     

    cCSAus      UL

  • Literature

Install a Qwik Jon® Ultima just about anywhere

  • Contains 1/2 HP mini-grinder pump
  • Dual cutting action provides over 70,000 cuts per minute (50 Hz: 60,000 cuts per minute), greatly reducing the potential for clogging and increasing pump reliability.
  • Preassembled pump and tank for easy installation
  • No need to destroy concrete floors
  • No need to elevate floor
  • Designed to accommodate a lavatory, bathtub and/or shower
  • Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
  • Reduces construction costs
  • 1” discharge (can be reduced to 3/4” to replace existing systems)
  • Pumps any direction
  • Can be installed either free-standing or behind a wall with the 2” MPT or 1-1/2” internal slip side inlets

Pump features

  • Automatic level control switch
  • Thermal overload protected motor
  • Stainless steel screws, bolts and handle
  • Non-clogging vortex impeller
  • UL listed, 3-wire, neoprene 9′ (3m) cord and plug
  • Maximum temperature 130 °F (54 °C)
  • 1 year limited warranty

Tank features

  • Durable ABS tank with white finish
  • Light-weight
  • Built-in check valve

Items included

  • Tank, lid and gasket
  • 1/2 HP mini-grinder pump
  • Back-flow device (check local codes)
  • 1” discharge and 1-1/2” vent
  • Hardware pack
  • Installation instructions
  • Shipping weight: 33 lbs (15Kg)

Items needed by installer

  • Supply fittings and waste pipe
  • Electrical source with ground fault interrupter (GFCI) protected receptacle
  • Water supply
  • Tools

Notes
Patent Nos. 7,203,976; 2,512,023; 9,352,327; 8,562,287

These pumps not designed for use in any other application.

 

Motor 1/2 HP
Hertz 60 Hz
Discharge Size 1″
Cord Length 9′ (3 m)
Cord Type UL listed, 3-wire neoprene cord and plug
Max Operating Temperature 130 °F (54 °C)
Motor Protection Thermal overload
Impeller Type Non-clogging vortex
Impeller Stainless steel
 

cCSAus      UL