Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

912 Preassembled 24 x 24 Sewage Systems


912 Preassembled 24 x 24 Sewage Systems

Package Systems

Preassembled 24" x 24" (61 x 61 cm) Sewage System. Complete and job ready for fast installation with new PSF cover designed with the Contractor in mind.

  • Features and Benefits

    Systems include

    • (1) 2” (50 mm) solids sewage ejector
    • (1) 24” x 24” (61 x 61 cm) poly-molded basin
    • (1) PSF cover with 2V2D
    • Internal 2” (DN50) PVC discharge pipe

    Pump Features

    • Cast iron construction (model 264/model 266)
    • Thermoplastic construction (model 211)
    • Automatic or piggyback configuration available
    • Full 2” (50 mm) spherical solids capacity
    • Thermal overload protection
    • Non-clogging vortex impeller
    • 3 year limited warranty on Model 264/266

    Basin/Cover Features

    • Shipped with clear construction cover
    • Easily removable access port, no bolts to remove
    • Removable float tree
    • Molded torque stops for added pump support
    • Threaded 2″ vent and 2″ discharge piping connections
    • 24×24 basin for shallow burial applications
    • 24″ (61 cm) depth for easier installation in troublesome areas
    • 41 gallon (155 liter) capacity (exceeds 18 x 30)
    • 25 gallon (95 liter) capacity below 4″ inlet
    • Anti-flotation device (AFD) helps to eliminate basin from “floating”
    • 360° molded handle (acts as secondary AFD)
    • Stackable for storage/shipping
    • Fully assembled
    • High water alarm available

    Basin Accessories

  • Product Specifications

     

    Motor 4/10 HP – 1/2 HP (0.7 – 1.7 kW)
    Voltage 115 V
    Phase 1 Ph
    Hertz 60 Hz
    RPM 1400 or 2800 RPM
    Type Split phase or permanent split capacitor
    Insulation Class B
    Amps 4.4 – 8.5 Amps
    Operation Automatic
    Auto On / Off Points Vary based on package
    Discharge Size 2″ NPT
    Solids Handling 2″ (50 mm) spherical solids
    Cord Length 20′ (6 m) standard
    Cord Type SOW/SOOW (CE model H07RN-F)
    Max Head 14′ (4.3 m), 22′ (6.7 m), 45.6′ (13.9m)
    Max Flow Rate 92 GPM (20.9 m3/hr), 24 m3/hr (106 GPM), 149 GPM (33.8 m3/hr)
    Max Operating Temperature 130 °F (54 °C)
    Cooling Oil filled
    Motor Protection Auto reset thermal overload
    Cap Cast iron
    Motor Housing Cast iron
    Pump Housing Cast iron
    Base Engineered plastic or cast iron
    Upper Bearing Sleeve bearing
    Lower Bearing Sleeve or ball bearing
    Mechanical Seals Carbon and ceramic
    Impeller Type Non-clogging vortex
    Impeller Engineered plastic or bronze
    Hardware Stainless steel
    Motor Shaft AISI 1215 cold roll steel, 1144 steel or JIS S45C steel
    Gasket Neoprene
  • Literature

Systems include

  • (1) 2” (50 mm) solids sewage ejector
  • (1) 24” x 24” (61 x 61 cm) poly-molded basin
  • (1) PSF cover with 2V2D
  • Internal 2” (DN50) PVC discharge pipe

Pump Features

  • Cast iron construction (model 264/model 266)
  • Thermoplastic construction (model 211)
  • Automatic or piggyback configuration available
  • Full 2” (50 mm) spherical solids capacity
  • Thermal overload protection
  • Non-clogging vortex impeller
  • 3 year limited warranty on Model 264/266

Basin/Cover Features

  • Shipped with clear construction cover
  • Easily removable access port, no bolts to remove
  • Removable float tree
  • Molded torque stops for added pump support
  • Threaded 2″ vent and 2″ discharge piping connections
  • 24×24 basin for shallow burial applications
  • 24″ (61 cm) depth for easier installation in troublesome areas
  • 41 gallon (155 liter) capacity (exceeds 18 x 30)
  • 25 gallon (95 liter) capacity below 4″ inlet
  • Anti-flotation device (AFD) helps to eliminate basin from “floating”
  • 360° molded handle (acts as secondary AFD)
  • Stackable for storage/shipping
  • Fully assembled
  • High water alarm available

Basin Accessories

 

Motor 4/10 HP – 1/2 HP (0.7 – 1.7 kW)
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 1400 or 2800 RPM
Type Split phase or permanent split capacitor
Insulation Class B
Amps 4.4 – 8.5 Amps
Operation Automatic
Auto On / Off Points Vary based on package
Discharge Size 2″ NPT
Solids Handling 2″ (50 mm) spherical solids
Cord Length 20′ (6 m) standard
Cord Type SOW/SOOW (CE model H07RN-F)
Max Head 14′ (4.3 m), 22′ (6.7 m), 45.6′ (13.9m)
Max Flow Rate 92 GPM (20.9 m3/hr), 24 m3/hr (106 GPM), 149 GPM (33.8 m3/hr)
Max Operating Temperature 130 °F (54 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Engineered plastic or cast iron
Upper Bearing Sleeve bearing
Lower Bearing Sleeve or ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Engineered plastic or bronze
Hardware Stainless steel
Motor Shaft AISI 1215 cold roll steel, 1144 steel or JIS S45C steel
Gasket Neoprene