
Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!
Residential Use Sump Pumps
Submersible pump for dewatering (sump).
Consult Factory for Special Applications
Notes
Reserve Powered Design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Motor | 1/2 HP | |
Voltage | 115 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3400 RPM | |
Type | Permanent split capacitor | |
Insulation | Class B | |
Amps | 5.0 Amps | |
Operation | Automatic or nonautomatic | |
Auto On / Off Points | 8-1/2″ / 3-5/8″ (21.6 cm / 9.2 cm) | |
Discharge Size | 1-1/2″ NPT | |
Solids Handling | 3/8″ (9 mm) spherical solids | |
Cord Length | 9′ (3 m) standard | |
Cord Type | UL listed, 3-wire cord and plug | |
Max Head | 25′ (7.6 m) | |
Max Flow Rate | 50 GPM (189 LPM) | |
Max Operating Temperature | 110 °F (43 °C) | |
Cooling | Oil free | |
Motor Protection | Auto reset thermal overload | |
Motor Housing | Engineered plastic | |
Pump Housing | Engineered plastic | |
Base | Engineered plastic | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered plastic | |
Hardware | Stainless steel | |
Motor Shaft | 410 stainless steel | |
Gasket | Buna-N o-ring | |
|
Consult Factory for Special Applications
Notes
Reserve Powered Design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Motor | 1/2 HP | |
Voltage | 115 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3400 RPM | |
Type | Permanent split capacitor | |
Insulation | Class B | |
Amps | 5.0 Amps | |
Operation | Automatic or nonautomatic | |
Auto On / Off Points | 8-1/2″ / 3-5/8″ (21.6 cm / 9.2 cm) | |
Discharge Size | 1-1/2″ NPT | |
Solids Handling | 3/8″ (9 mm) spherical solids | |
Cord Length | 9′ (3 m) standard | |
Cord Type | UL listed, 3-wire cord and plug | |
Max Head | 25′ (7.6 m) | |
Max Flow Rate | 50 GPM (189 LPM) | |
Max Operating Temperature | 110 °F (43 °C) | |
Cooling | Oil free | |
Motor Protection | Auto reset thermal overload | |
Motor Housing | Engineered plastic | |
Pump Housing | Engineered plastic | |
Base | Engineered plastic | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered plastic | |
Hardware | Stainless steel | |
Motor Shaft | 410 stainless steel | |
Gasket | Buna-N o-ring | |
|