
Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!
Obsolete Products
This product is obsolete. For a current product, please see Model 73.
This product is obsolete. For a current product, please see Model 73.
Consult Factory for Special Applications:
Notes
Reserve Powered Design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Motor | 3/10 HP | |
Voltage | 115 V | |
Phase | 1 Ph | |
Hertz | 60 | |
RPM | 3450 RPM | |
Type | Permanent split capacitor | |
Insulation | Class B | |
Amps | 3.1 Amps | |
Operation | Automatic or nonautomatic | |
Auto On / Off Points | 7-3/8″ / 3-5/8″ (18.7 cm / 9.2 cm) | |
Discharge Size | 1-1/2″ NPT | |
Solids Handling | 3/8″ (9 mm) spherical solids | |
Cord Length | 9′ (3 m) standard | |
Cord Type | UL listed cord with 3-prong plug | |
Max Head | 18′ (5.5 m) | |
Max Flow Rate | 38 GPM (144 LPM) | |
Max Operating Temperature | 110 °F (43 °C) | |
Cooling | Oil free | |
Motor Protection | Auto reset thermal overload | |
Motor Housing | Engineered plastic | |
Pump Housing | Engineered plastic | |
Base | Engineered plastic | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered plastic | |
Hardware | Stainless steel | |
Motor Shaft | 42OJ2 stainless steel | |
Gasket | NBR | |
|
This product is obsolete. For a current product, please see Model 73.
Consult Factory for Special Applications:
Notes
Reserve Powered Design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Motor | 3/10 HP | |
Voltage | 115 V | |
Phase | 1 Ph | |
Hertz | 60 | |
RPM | 3450 RPM | |
Type | Permanent split capacitor | |
Insulation | Class B | |
Amps | 3.1 Amps | |
Operation | Automatic or nonautomatic | |
Auto On / Off Points | 7-3/8″ / 3-5/8″ (18.7 cm / 9.2 cm) | |
Discharge Size | 1-1/2″ NPT | |
Solids Handling | 3/8″ (9 mm) spherical solids | |
Cord Length | 9′ (3 m) standard | |
Cord Type | UL listed cord with 3-prong plug | |
Max Head | 18′ (5.5 m) | |
Max Flow Rate | 38 GPM (144 LPM) | |
Max Operating Temperature | 110 °F (43 °C) | |
Cooling | Oil free | |
Motor Protection | Auto reset thermal overload | |
Motor Housing | Engineered plastic | |
Pump Housing | Engineered plastic | |
Base | Engineered plastic | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered plastic | |
Hardware | Stainless steel | |
Motor Shaft | 42OJ2 stainless steel | |
Gasket | NBR | |
|