Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

Model 212 Sewage Pump


Model 212 Sewage Pump

Residential Use Sewage Pumps

Submersible pump for sewage/effluent or dewatering, passes 2" spherical solids, 2" NPT discharge

  • Features & Benefits
    • Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
    • Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
    • Efficient heat sink for heat dissipation
    • Engineered plastic base and pump housing with no screen
    • Passes 2” (50 mm) spherical solids
    • Reliable integrated vertical switch
    • Carbon and ceramic rotary seal
    • Watertight, NBR rubber seal between motor and cover
    • Stainless steel screws and hardware
    • Temperature rating: 104 °F (40 °C)
    • On point: 11-1/2” (29 cm)
    • Off point: 5-1/4” (13 cm)
    • Maximum width: 9-27/32″ (25 cm)
    • Maximum height: 15-7/8″ (40.3 cm)
    • Weight: 12.2 lbs (5.5 kg)
    • Fits 12″ (30 cm) diameter pits
    • 100% factory tested after assembly
    • 2 year limited warranty

    Consult factory for special applications:

    • Variable level float switches
    • Variable level long cycle systems
    • Alarm systems
  • Product Specifications
    Motor 1/2 HP
    Voltage 115 V
    Phase 1 Ph
    Hertz 60 Hz
    RPM 3400 RPM
    Type Permanent split capacitor
    Insulation Class B
    Amps 6.6 Amps
    Operation Automatic
    Auto On / Off Points 11-1/2″ (29 cm), 5-1/4″ (13 cm)
    Discharge Size 2″ NPT
    Solids Handling 2″ (50 mm) spherical solids
    Cord Length 10′ (3 m) – 20′ (6 m)
    Cord Type UL listed with 3-wire, grounded plug
    Max Head 19-1/2′ (5.9 m)
    Max Flow Rate 82 GPM (310 LPM)
    Max Operating Temperature 104 °F (40 °C)
    Cooling Oil filled
    Motor Protection Auto reset thermal overload
    Motor Housing Cast iron
    Pump Housing Engineered plastic
    Base Engineered plastic
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic
    Impeller Type Non-clogging vortex
    Impeller Engineered plastic
    Hardware Stainless steel
    Motor Shaft SUS 420J2 stainless steel
    Gasket NBR
     

    cCSAus      Powder Coated Tough

  • Literature

    Pump Performance Curves

    Performance Curve Model 212, 153444

     

    Performance Curve Model 212_153444

    Performance Curve Model 212_153444

    Performance Chart Model 212, 153444

    Performance Chart Model 212, 153444

    Performance Chart Model 212, 153444

    Design Tools


    BIM, Revit, Model 212, Automatic

    Dimensional Drawing, Model 212, SK3054

    Dimensional drawing Model 212, SK3054

    Dimensional drawing Model 212, SK3054

     

  • Packages & Accessories
  • Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
  • Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
  • Efficient heat sink for heat dissipation
  • Engineered plastic base and pump housing with no screen
  • Passes 2” (50 mm) spherical solids
  • Reliable integrated vertical switch
  • Carbon and ceramic rotary seal
  • Watertight, NBR rubber seal between motor and cover
  • Stainless steel screws and hardware
  • Temperature rating: 104 °F (40 °C)
  • On point: 11-1/2” (29 cm)
  • Off point: 5-1/4” (13 cm)
  • Maximum width: 9-27/32″ (25 cm)
  • Maximum height: 15-7/8″ (40.3 cm)
  • Weight: 12.2 lbs (5.5 kg)
  • Fits 12″ (30 cm) diameter pits
  • 100% factory tested after assembly
  • 2 year limited warranty

Consult factory for special applications:

  • Variable level float switches
  • Variable level long cycle systems
  • Alarm systems
Motor 1/2 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 3400 RPM
Type Permanent split capacitor
Insulation Class B
Amps 6.6 Amps
Operation Automatic
Auto On / Off Points 11-1/2″ (29 cm), 5-1/4″ (13 cm)
Discharge Size 2″ NPT
Solids Handling 2″ (50 mm) spherical solids
Cord Length 10′ (3 m) – 20′ (6 m)
Cord Type UL listed with 3-wire, grounded plug
Max Head 19-1/2′ (5.9 m)
Max Flow Rate 82 GPM (310 LPM)
Max Operating Temperature 104 °F (40 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload
Motor Housing Cast iron
Pump Housing Engineered plastic
Base Engineered plastic
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Engineered plastic
Hardware Stainless steel
Motor Shaft SUS 420J2 stainless steel
Gasket NBR
 

cCSAus      Powder Coated Tough

Pump Performance Curves

Performance Curve Model 212, 153444

 

Performance Curve Model 212_153444

Performance Curve Model 212_153444

Performance Chart Model 212, 153444

Performance Chart Model 212, 153444

Performance Chart Model 212, 153444

Design Tools


BIM, Revit, Model 212, Automatic

Dimensional Drawing, Model 212, SK3054

Dimensional drawing Model 212, SK3054

Dimensional drawing Model 212, SK3054