Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

Compression Unichecks


Compression Unichecks

Accessories

PVC plastic, compression-type unicheck valves

  • Features and Benefits
    • Full-flow, non-clog design
    • Checks backflow of water and sewer gas
    • Durable PVC-constructed check body and compression end fittings
    • Compression end fittings allow easy installation, no threading of pipe required
    • Corrosion-resistant, non-metallic parts
    • Buna N flapper, double shielded with PVC
    • Buna N compression ring seals
    • Reduces motor and pump noise from plumbing system
    • Designed for both horizontal and vertical usage
    • Pressure rated at 125 PSI (861 kPa) (285′ [86.9 m]) at 75 °F (24 °C)
    • Consult factory if use over 130 °F (54 °C) required
    • Suitable for installation below basin cover
    • P/N 30-0030, P/N 30-0020, P/N 30-0015, P/N 30-0025*, P/N 30-0204*
    • 1 year limited warranty

    * Compression union, solvent-weld end fittings

  • Literature

    Water hammer creates momentary high pressure surges. These surges can cause severe damage to check valves and the piping system. Consideration for water hammer must be included in the piping system design. Reference ASPE Data Book, Chapter 2.33. May require check valves with special non-slam features or other engineered solutions.

  • Full-flow, non-clog design
  • Checks backflow of water and sewer gas
  • Durable PVC-constructed check body and compression end fittings
  • Compression end fittings allow easy installation, no threading of pipe required
  • Corrosion-resistant, non-metallic parts
  • Buna N flapper, double shielded with PVC
  • Buna N compression ring seals
  • Reduces motor and pump noise from plumbing system
  • Designed for both horizontal and vertical usage
  • Pressure rated at 125 PSI (861 kPa) (285′ [86.9 m]) at 75 °F (24 °C)
  • Consult factory if use over 130 °F (54 °C) required
  • Suitable for installation below basin cover
  • P/N 30-0030, P/N 30-0020, P/N 30-0015, P/N 30-0025*, P/N 30-0204*
  • 1 year limited warranty

* Compression union, solvent-weld end fittings

Water hammer creates momentary high pressure surges. These surges can cause severe damage to check valves and the piping system. Consideration for water hammer must be included in the piping system design. Reference ASPE Data Book, Chapter 2.33. May require check valves with special non-slam features or other engineered solutions.