This product is obsolete. For a current product, please see Aquanot® Spin 508.

Designed using Zoeller’s time-tested components giving you the needed performance and reliability.

Pump

• 12 V, highly-efficient, non-corrosive pump construction. Supplied with 6′ (1.8 m) leads.
• NOT a Bilge pump. Designed, Engineered and Assembled by Zoeller^® as a sump pump
• Integrated check valve
• Legs allow free-standing installation
• Quick disconnect discharge
• Aluminum seal pocket and cooling plate
• Hand built and 100% tested in USA
• Efficient design means more water pumped during emergencies
• 3-year warranty

(Primary sump pump not included with Model 508)

Patent #D740329

Control Box

Includes battery burn-out and overcharge protection. The self-contained, 10 amp battery recharger system is a solid-state, automatic controller with alarms, light indicators and warning systems.

LCD Screen

Always displays battery voltage along with other helpful information about the system.

LED Light Indicators

• AC Power – blinks red when power is out
• Charged – green indicates battery is fully charged
• Charging – yellow indicates power is going to battery
• Low Battery – red light blinks when below 10.8 volts and rapidly blinks when below 8.4 volts
• High Water – yellow light will blink when the float is activated, and becomes solid after 3 seconds
• Alarm Off – yellow light indicates the buzzer is currently silenced

Alarms

• High Water
• Reverse Polarity
• Low Battery

Buttons

• Scroll – display information on the system such as DC pump cycles and power outages
• Alarm Reset – press to reset alarms. Press and hold for three seconds for 24-hour buzzer silence

Auxiliary Alarm Contact

A set of dry contacts allows system to connect to home security alarm, auto dialers, etc.
Receive alarms through Z Control^® Cloud! See FM3010.

Switch

Reliable, low voltage vertical float switch

Battery Case

The included battery case will accommodate maximum battery dimensions of 13″ L x 7-1/2″ W x 9-1/2″ H (33 cm L x 19 cm W x 24 cm H) and fits all group size 27, 29 and 31 batteries. Made from non-corrodible polyethylene. To use multiple batteries, order extra battery case with hook-up wire (P/N 007861). *Battery not included.

Fittings

An integrated DC pump discharge check valve, additional AC pump check valve, tee, and adapter are included.

Technology

This charger uses the latest switch mode technology available. This allows for an extremely efficient charger in a compact design. It satisfies the rigid California Battery Council standards. Charger is also cURus approved.