Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

900 Series Sump Package


900 Series Sump Package

Package Systems

Preassembled sump pump systems. Job-ready for a quick and easy installation.

  • Features and Benefits

    Preassembled

    • Pump switch installed 180° from inlet
    • Discharge pipe is plumbed with a pre-drilled 3/16” (5 mm) vent hole
    • Electrical cord seal installed in cover
    • Cover sealed and bolted down
    • Basin filled with environmentally-safe peanuts for safe transit. Just add water and they dissolve
    • Automatic, cast iron or thermoplastic pump with tank and all hardware
    • 18” x 22” (46 x 56 cm)basin with 4” inlet
    • Deluxe unit has a radon approved basin and cover for radon prevention
    • Standard and economy models use a polyethylene basin and cover
    • Deluxe cover has a 3” vent, 1-1/2” discharge
    • Standard and economy covers have a 2” vent, 1-1/2” discharge
    • Fast, easy and job-ready

    Deluxe and standard systems (model M53 pump)

    • Automatic, float-operated mechanical switch
    • 9′ (2.7 m), UL listed, 3-wire cord and plug
    • Stainless steel screws, guard, handle and switch arm
    • Passes 1/2” (50 mm) spherical solids
    • 1-1/2” NPT discharge
    • 1550 RPM
    • Non-clogging vortex impeller
    • Glass-filled polypropylene base with built-in strainer
    • Temperature rated 130 °F (54 °C)
    • 3 year limited warranty

    Economy system (model M72 pump)

    • 9′ (2.7 m), UL listed, 3-wire cord and plug
    • Stainless steel screws, switch arm and lower motor housing
    • Oil-free pump
    • Passes 3/8” (10 mm) spherical solids
    • 1-1/2” NPT discharge
    • 3400 RPM
    • Non-clogging vortex impeller
    • Temperature rated 110 °F (54 °C)
    • 2 year limited warranty

    Notes
    Job ready for easy installation.

    Reserve powered design.
    For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

  • Product Specifications
    Hertz 60 Hz
    Discharge Size 1-1/2″ NPT
    Cord Length 9′ (2.7 m) standard
    Impeller Type Non-clogging vortex
    Hardware Stainless steel
                        cCSAus
  • Literature

    Warning

    To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug.

    Pump Performance Curves

    Performance Curve Models 53, 72, 015887

    Performance Curve Models 53, 72, 015887

Preassembled

  • Pump switch installed 180° from inlet
  • Discharge pipe is plumbed with a pre-drilled 3/16” (5 mm) vent hole
  • Electrical cord seal installed in cover
  • Cover sealed and bolted down
  • Basin filled with environmentally-safe peanuts for safe transit. Just add water and they dissolve
  • Automatic, cast iron or thermoplastic pump with tank and all hardware
  • 18” x 22” (46 x 56 cm)basin with 4” inlet
  • Deluxe unit has a radon approved basin and cover for radon prevention
  • Standard and economy models use a polyethylene basin and cover
  • Deluxe cover has a 3” vent, 1-1/2” discharge
  • Standard and economy covers have a 2” vent, 1-1/2” discharge
  • Fast, easy and job-ready

Deluxe and standard systems (model M53 pump)

  • Automatic, float-operated mechanical switch
  • 9′ (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, guard, handle and switch arm
  • Passes 1/2” (50 mm) spherical solids
  • 1-1/2” NPT discharge
  • 1550 RPM
  • Non-clogging vortex impeller
  • Glass-filled polypropylene base with built-in strainer
  • Temperature rated 130 °F (54 °C)
  • 3 year limited warranty

Economy system (model M72 pump)

  • 9′ (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, switch arm and lower motor housing
  • Oil-free pump
  • Passes 3/8” (10 mm) spherical solids
  • 1-1/2” NPT discharge
  • 3400 RPM
  • Non-clogging vortex impeller
  • Temperature rated 110 °F (54 °C)
  • 2 year limited warranty

Notes
Job ready for easy installation.

Reserve powered design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Hertz 60 Hz
Discharge Size 1-1/2″ NPT
Cord Length 9′ (2.7 m) standard
Impeller Type Non-clogging vortex
Hardware Stainless steel
                    cCSAus

Warning

To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug.

Pump Performance Curves

Performance Curve Models 53, 72, 015887

Performance Curve Models 53, 72, 015887