
Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!
Commercial Grinder Pumps
1.0, 1.5 and 2.0 HP, single-direction grinder pumps uniquely designed with integral control
Notes
Product may not be exactly as pictured.
Contact factory for control panel selection.
Consult factory for access doors available on field mount systems and special basin configurations.
Motor | 1.0 – 2.0 HP | |
Voltage | 115 – 200 – 230 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3450 RPM | |
Type | Capacitor start / capacitor run | |
Insulation | Class B | |
Amps | 7.7 – 15.5 Amps | |
Operation | Automatic or nonautomatic | |
Auto On / Off Points | Variable level float switch, customer sets | |
Discharge Size | 1-1/4″ NPT vertical | |
Cord Length | 20′ (6 m) standard | |
Cord Type | SOW or SOOW multi-wire neoprene | |
Max Head | 107′ (32.6 m) | |
Max Flow Rate | 46 GPM (174 LPM) | |
Max Operating Temperature | 130 °F (54 °C) | |
Cooling | Oil filled | |
Motor Protection | Auto reset thermal overload | |
Cap | Cast iron | |
Motor Housing | Cast iron | |
Pump Housing | Cast iron | |
Base | Cast iron | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon/ceramic | |
Impeller Type | Vortex | |
Impeller | Engineered plastic | |
Hardware | Stainless steel | |
Motor Shaft | Stainless steel | |
Gasket | Neoprene | |
![]() ![]() ![]() |
Notes
Product may not be exactly as pictured.
Contact factory for control panel selection.
Consult factory for access doors available on field mount systems and special basin configurations.
Motor | 1.0 – 2.0 HP | |
Voltage | 115 – 200 – 230 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3450 RPM | |
Type | Capacitor start / capacitor run | |
Insulation | Class B | |
Amps | 7.7 – 15.5 Amps | |
Operation | Automatic or nonautomatic | |
Auto On / Off Points | Variable level float switch, customer sets | |
Discharge Size | 1-1/4″ NPT vertical | |
Cord Length | 20′ (6 m) standard | |
Cord Type | SOW or SOOW multi-wire neoprene | |
Max Head | 107′ (32.6 m) | |
Max Flow Rate | 46 GPM (174 LPM) | |
Max Operating Temperature | 130 °F (54 °C) | |
Cooling | Oil filled | |
Motor Protection | Auto reset thermal overload | |
Cap | Cast iron | |
Motor Housing | Cast iron | |
Pump Housing | Cast iron | |
Base | Cast iron | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon/ceramic | |
Impeller Type | Vortex | |
Impeller | Engineered plastic | |
Hardware | Stainless steel | |
Motor Shaft | Stainless steel | |
Gasket | Neoprene | |
![]() ![]() ![]() |