Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

810, 815 Series Grinder Pumps


810, 815 Series Grinder Pumps

Grinder

Progressing cavity grinder pump

  • Features and Benefits
    • Finned, class 30 cast iron construction
    • Oil-filled, hermetically-sealed motor with Class B windings
    • Hardened stainless steel cutter and disc, Rockwell C55-60
    • Stainless steel hydraulic pump rotor
    • Pressure relief valve
    • Upper and lower ball bearing construction
    • Carbon/ceramic mechanical seal
    • Integral thermal overload protection with automatic reset
    • Stainless steel mounting stand for free-standing installation
    • Preassembled systems available
    • 2 year limited warranty

    Standard Features:

    • 1-1/4” NPT discharge
    • Carbon/ceramic tandem seals
    • Hydraulic stainless steel rotor and Buna N stator
    • Stainless steel cutter plate/cutter
    • Stainless steel shaft and hardware
    • Corrosion-resistant, powder coated epoxy finish
    • 20′ (6 m) power cord. 25′, 35′ and 50′ (8 m, 11 m, 15 m) options available

    Notes
    Product may not be exactly as pictured.

    All variable level float switches in this section are mechanically activated and do not contain mercury.

    922 Packaged Systems: Refer to FM2370 for packaged fiberglass or poly-ribbed basin assemblies for the models 810 and 815.

  • Product Specifications

     

    Motor 1 – 2 HP
    Voltage 230 V or 200 V (2 HP Only)
    Phase 1 Ph
    Hertz 60 Hz
    RPM 1750 RPM
    Type Permanent split capacitor
    Insulation Class B
    Amps 7.0 – 12.0 Amps
    Operation Nonautomatic
    Discharge Size 1-1/4″ NPT
    Cord Length 20′ (6 m) standard
    Cord Type 3-wire neoprene
    Max Head 810: 150′ (45.7 m), 815: 240′ (73.2 m)
    Max Flow Rate 14.6 GPM (55 LPM)
    Max Operating Temperature 130 °F (54 °C)
    Cooling Oil filled
    Motor Protection Auto reset thermal overload
    Cap Cast iron
    Motor Housing Cast iron
    Pump Housing Cast iron
    Base Stainless steel stand
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic
    Impeller Type Hydraulic rotor
    Impeller Stainless steel
    Hardware Stainless steel
    Motor Shaft Stainless steel
    Gasket Neoprene
        60Hz    cCSAus    Powder Coated Tough    SWPA
  • Literature
  • Packages and Accessories

    Accessories for Field-Assembled Systems

    • Flex-hose discharge assembly, P/N 10-2038 with 30″ (76 cm) hose
    • Square guide rail system, P/N 39-0106 48” (122 cm) deep basin, P/N 39-0107 60” (152 cm) deep basin, P/N 39-0108 72” (183 cm) deep basin
    • Rail extension bracket P/N 39-0070
    • Stainless steel lifting cables and rod P/N 39-0031 8’ (2.4 m) cable, P/N 39-0032 12’ (3.7 m) cable, P/N 39-0069 1’ (0.3 m) rod
    • Pre-wired conduit (10-0580 Qwik Box required) 5100-0016 – 25’ (8 m), 5100-0017 – 35’ (11 m), 5100-0018 – 50’ (15 m)
    • Galvanized 1.25” discharge elbow P/N 018386
    • Check valve P/N 30-0223 1.25” NPT brass
    • Ball valve P/N 30-0165 1.25” PVC
  • Finned, class 30 cast iron construction
  • Oil-filled, hermetically-sealed motor with Class B windings
  • Hardened stainless steel cutter and disc, Rockwell C55-60
  • Stainless steel hydraulic pump rotor
  • Pressure relief valve
  • Upper and lower ball bearing construction
  • Carbon/ceramic mechanical seal
  • Integral thermal overload protection with automatic reset
  • Stainless steel mounting stand for free-standing installation
  • Preassembled systems available
  • 2 year limited warranty

Standard Features:

  • 1-1/4” NPT discharge
  • Carbon/ceramic tandem seals
  • Hydraulic stainless steel rotor and Buna N stator
  • Stainless steel cutter plate/cutter
  • Stainless steel shaft and hardware
  • Corrosion-resistant, powder coated epoxy finish
  • 20′ (6 m) power cord. 25′, 35′ and 50′ (8 m, 11 m, 15 m) options available

Notes
Product may not be exactly as pictured.

All variable level float switches in this section are mechanically activated and do not contain mercury.

922 Packaged Systems: Refer to FM2370 for packaged fiberglass or poly-ribbed basin assemblies for the models 810 and 815.

 

Motor 1 – 2 HP
Voltage 230 V or 200 V (2 HP Only)
Phase 1 Ph
Hertz 60 Hz
RPM 1750 RPM
Type Permanent split capacitor
Insulation Class B
Amps 7.0 – 12.0 Amps
Operation Nonautomatic
Discharge Size 1-1/4″ NPT
Cord Length 20′ (6 m) standard
Cord Type 3-wire neoprene
Max Head 810: 150′ (45.7 m), 815: 240′ (73.2 m)
Max Flow Rate 14.6 GPM (55 LPM)
Max Operating Temperature 130 °F (54 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Stainless steel stand
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Hydraulic rotor
Impeller Stainless steel
Hardware Stainless steel
Motor Shaft Stainless steel
Gasket Neoprene
    60Hz    cCSAus    Powder Coated Tough    SWPA

Accessories for Field-Assembled Systems

  • Flex-hose discharge assembly, P/N 10-2038 with 30″ (76 cm) hose
  • Square guide rail system, P/N 39-0106 48” (122 cm) deep basin, P/N 39-0107 60” (152 cm) deep basin, P/N 39-0108 72” (183 cm) deep basin
  • Rail extension bracket P/N 39-0070
  • Stainless steel lifting cables and rod P/N 39-0031 8’ (2.4 m) cable, P/N 39-0032 12’ (3.7 m) cable, P/N 39-0069 1’ (0.3 m) rod
  • Pre-wired conduit (10-0580 Qwik Box required) 5100-0016 – 25’ (8 m), 5100-0017 – 35’ (11 m), 5100-0018 – 50’ (15 m)
  • Galvanized 1.25” discharge elbow P/N 018386
  • Check valve P/N 30-0223 1.25” NPT brass
  • Ball valve P/N 30-0165 1.25” PVC