
Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!
Grinder
These fractional-horsepower grinder pumps can handle an entire household of flushable materials. This Shark product line consists of three high-performing grinder pumps for sewer use. Plumbing contractors can utilize this cast iron grinder series for demanding residential applications.
These high-quality grinder pump systems offer a host of advanced features providing numerous benefits for contractors and homeowners:
Handles entire household of “flushable” materials.
Cast iron grinder series for difficult residential applications where ejectors struggle.
Zoeller Pump Company is proud to be a fourth-generation family-owned business headquartered in Louisville, Kentucky. Since our founding in 1939, we’ve established ourselves as a wastewater management industry leader and innovator. We manufacture our Shark grinder pump series in the USA with 95% domestic materials, ensuring exceptional quality and longevity.
Our unwavering commitment to quality enables Zoeller Pump products to set the bar high for other industry manufacturers. Our focus on quality and testing allows us to design and manufacture pumps that exceed contractor and end-user expectations.
Our extensive network of Zoeller Shark Grinder Pump distributors can provide additional information regarding this advanced pump series and help you make an informed purchasing decision. Stop by today or contact your nearest supplier to learn more.
Motor | 1/2 – 1 HP | |
Voltage | 115 V or 230 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3400 RPM | |
Type | Capacitor start/capacitor run | |
Insulation | Class B | |
Amps | 7.0 – 11.0 Amps (115 V), 3.0 – 5.0 Amps (230 V) | |
Operation | Automatic and nonautomatic | |
Auto On / Off Points | 13″ (33 cm) / 5-3/4″ (14.6 cm) | |
Discharge Size | 1-1/4″ NPT | |
Cord Length | 15′ (4.6 m) | |
Cord Type | UL-listed, 3-wire plug | |
Max Head | 55′ (16.8 m) | |
Cooling | Oil filled | |
Motor Protection | Automatic thermal overload (1Ph) | |
Cap | Cast iron | |
Motor Housing | Cast iron | |
Pump Housing | Cast iron | |
Base | Cast iron | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered plastic/440C stainless steel cutter & plate | |
Hardware | Stainless steel | |
Motor Shaft | 1215 cold rolled steel | |
Gasket | Neoprene | |
![]() ![]() ![]() ![]() |
These high-quality grinder pump systems offer a host of advanced features providing numerous benefits for contractors and homeowners:
Handles entire household of “flushable” materials.
Cast iron grinder series for difficult residential applications where ejectors struggle.
Zoeller Pump Company is proud to be a fourth-generation family-owned business headquartered in Louisville, Kentucky. Since our founding in 1939, we’ve established ourselves as a wastewater management industry leader and innovator. We manufacture our Shark grinder pump series in the USA with 95% domestic materials, ensuring exceptional quality and longevity.
Our unwavering commitment to quality enables Zoeller Pump products to set the bar high for other industry manufacturers. Our focus on quality and testing allows us to design and manufacture pumps that exceed contractor and end-user expectations.
Our extensive network of Zoeller Shark Grinder Pump distributors can provide additional information regarding this advanced pump series and help you make an informed purchasing decision. Stop by today or contact your nearest supplier to learn more.
Motor | 1/2 – 1 HP | |
Voltage | 115 V or 230 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3400 RPM | |
Type | Capacitor start/capacitor run | |
Insulation | Class B | |
Amps | 7.0 – 11.0 Amps (115 V), 3.0 – 5.0 Amps (230 V) | |
Operation | Automatic and nonautomatic | |
Auto On / Off Points | 13″ (33 cm) / 5-3/4″ (14.6 cm) | |
Discharge Size | 1-1/4″ NPT | |
Cord Length | 15′ (4.6 m) | |
Cord Type | UL-listed, 3-wire plug | |
Max Head | 55′ (16.8 m) | |
Cooling | Oil filled | |
Motor Protection | Automatic thermal overload (1Ph) | |
Cap | Cast iron | |
Motor Housing | Cast iron | |
Pump Housing | Cast iron | |
Base | Cast iron | |
Upper Bearing | Ball bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered plastic/440C stainless steel cutter & plate | |
Hardware | Stainless steel | |
Motor Shaft | 1215 cold rolled steel | |
Gasket | Neoprene | |
![]() ![]() ![]() ![]() |