Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

80 Series Pedestal Pumps


80 Series Pedestal Pumps

Residential Sump Pits


Pedestal sump pumps for residential dewatering

  • Features & Benefits
    • Metal enclosed, split phase motor, permanently lubricated, thermal overload protected
    • Heavy-duty thermoplastic or cast iron constructed pump housing and base
    • Top intake strainer is part of pump housing, passes lint
    • No strainer to deteriorate, replace or periodically clean
    • Model 81 – 1-1/4” FPT discharge
    • Models 82 and 84 – 1-1/2” FPT discharge
    • High-impact, PVC (1-1/2” OD) column
    • Non-corrosive shaft
    • Reliable positive-displacement switch
    • Chemically-resistant, polyethylene float
    • Plated steel float rod
    • Nylon guide
    • Permanently-lubricated upper sleeve bearing
    • Durable lower bronze bushing
    • Adjustable 12” cycle, factory set at 9” (22.8 cm)
    • Max. on: 16” (41 cm)
    • Min. off: 4” (10 cm)
    • Temperature rating: 130 °F (54 °C)
    • Minimum pit size recommended: 18” x 22” (45.7 x 55.8 cm)
    • Model 81: Thermpolastic, 3/10 HP
    • Model 82: Cast iron, 1/3 HP
    • Model 84: Cast iron, 1/2 HP
    • 2 year limited warranty

    Notes
    This unit is designed for indoor applications where the motor is mounted above the pit cover and protected from water, water spray and high humidity. Pump is not intended for use with flammable liquids.

    Product may not be exactly as shown.

  • Product Specifications
    Motor 1/3 or 1/2 HP
    Voltage 115 V
    Phase 1 Ph
    Hertz 60 Hz
    RPM 1725 RPM
    Type Split phase
    Amps 4.0 – 7.3 Amps
    Operation Automatic
    Auto On / Off Points Adjustable
    Discharge Size 1-1/4″ or 1-1/2″ FPT
    Cord Length 7-1/2′ (2.3 m)
    Cord Type UL listed, 3-wire cord and plug
    Max Head 16′ (4.9 m), 21′ (6.4 m), 24′ (7.3 m)
    Max Flow Rate 50 GPM (189 LPM), 59 GPM (223 LPM)
    Max Operating Temperature 130 °F (54 °C)
    Cooling Air
    Motor Protection Auto reset thermal overload
    Pump Housing Heavy duty thermosplastic or cast iron
    Upper Bearing Permanently lubricated sleeve bearing
    Lower Bearing Bronze bushing
    Impeller Type Non-clogging
    Impeller Engineered thermoplastic
     

    60Hz      cCSAus      SSPMA

  • Literature

    Model Comparison Charts

  • Metal enclosed, split phase motor, permanently lubricated, thermal overload protected
  • Heavy-duty thermoplastic or cast iron constructed pump housing and base
  • Top intake strainer is part of pump housing, passes lint
  • No strainer to deteriorate, replace or periodically clean
  • Model 81 – 1-1/4” FPT discharge
  • Models 82 and 84 – 1-1/2” FPT discharge
  • High-impact, PVC (1-1/2” OD) column
  • Non-corrosive shaft
  • Reliable positive-displacement switch
  • Chemically-resistant, polyethylene float
  • Plated steel float rod
  • Nylon guide
  • Permanently-lubricated upper sleeve bearing
  • Durable lower bronze bushing
  • Adjustable 12” cycle, factory set at 9” (22.8 cm)
  • Max. on: 16” (41 cm)
  • Min. off: 4” (10 cm)
  • Temperature rating: 130 °F (54 °C)
  • Minimum pit size recommended: 18” x 22” (45.7 x 55.8 cm)
  • Model 81: Thermpolastic, 3/10 HP
  • Model 82: Cast iron, 1/3 HP
  • Model 84: Cast iron, 1/2 HP
  • 2 year limited warranty

Notes
This unit is designed for indoor applications where the motor is mounted above the pit cover and protected from water, water spray and high humidity. Pump is not intended for use with flammable liquids.

Product may not be exactly as shown.

Motor 1/3 or 1/2 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 1725 RPM
Type Split phase
Amps 4.0 – 7.3 Amps
Operation Automatic
Auto On / Off Points Adjustable
Discharge Size 1-1/4″ or 1-1/2″ FPT
Cord Length 7-1/2′ (2.3 m)
Cord Type UL listed, 3-wire cord and plug
Max Head 16′ (4.9 m), 21′ (6.4 m), 24′ (7.3 m)
Max Flow Rate 50 GPM (189 LPM), 59 GPM (223 LPM)
Max Operating Temperature 130 °F (54 °C)
Cooling Air
Motor Protection Auto reset thermal overload
Pump Housing Heavy duty thermosplastic or cast iron
Upper Bearing Permanently lubricated sleeve bearing
Lower Bearing Bronze bushing
Impeller Type Non-clogging
Impeller Engineered thermoplastic
 

60Hz      cCSAus      SSPMA

Model Comparison Charts