Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!

X
MENU CLOSE

40 Series Utility Pumps


40 Series Utility Pumps

General Water Transfer

Use Floor Sucker utility pumps submerged or on any flat surface to transfer clear water.

  • Features & Benefits
    • Use fully or partially submerged
    • Durable, polypropylene housing
    • 3-prong power cord, 9′ or 20′ (3 or 6 m)
    • High-quality, sealed motor
    • Thermal overload protected motor
    • Model 42 is adaptable for use with standard garden hose (fitting included), 1″ NPT pipe or 1-1/4″ slip fit (use discharge hose kit P/N 1010-0117)
    • Model 44 (60 Hz) is adaptable for use with standard garden hose (fitting included), 1-1/4″ female NPT or 3/4″ female NPT adapter
    • Model LM44 (60 Hz) with automatic operation. Utility applications only*
    • Model 46 (60 Hz) has a 2″ NPT discharge with a 2″ hose adapter
    • Screened bottom may be removed to allow easy cleaning
    • Use indoors or outdoors
    • Typical applications: dewatering and filling
    • Oil-free (models 42 and 44 only)
    • Models 42 and 44 remove water from any flat surface down to 1/8″ (3 mm). Model 46 will pump down to 1″ (25 mm).
    • Light-weight and portable
    • Compact design: models 42 and 44 will fit in a 7″ (178 mm) opening. Model 46 will fit in an 8″ (203 mm) opening.
    • Temperature rating: 104 °F (40 °C)
    • 1 year limited warranty
  • Product Specifications
    Motor 1/6 – 1/2 HP
    Voltage 115 V
    Phase 1 Ph
    Hertz 60 Hz
    RPM 3450 RPM
    Type Permanent split capacitor
    Insulation Class B
    Amps 1.5 – 6.0 Amps
    Operation Automatic and nonautomatic
    Discharge Size Various
    Cord Length 9 or 20′ (3 or 6 m) standard
    Cord Type 3-prong
    Max Head 33′ (10 m)
    Max Flow Rate 3,300 GPH (12,492 LPH)
    Max Operating Temperature 104 °F (40 °C)
    Cooling Oil free or oil filled
    Motor Protection Auto reset thermal overload
    Motor Housing Engineered plastic
    Base Engineered plastic
    Upper Bearing Ball bearing
    Lower Bearing Ball bearing
    Mechanical Seals Carbon and ceramic
    Impeller Type Non-clogging vortex
    Impeller Enginnered plastic
    Hardware Stainless steel
    Motor Shaft SUS 416 stainless steel
    Gasket NBR
     

    cCSAus      SSPMA

  • Literature

    Model Comparison Charts

    • Product
      Model Comparison Chart: 60hz

      model seal mode volts phase amps hp hz lbs kg
      N42 Single Non 115 1 1.5 1/6 60 7 3
      LM44 Single Auto 115 1 2.5 1/4 60 9 4
      N44 Single Non 115 1 2.5 1/4 60 9 4
      N45 Single Non 115 1 2.5 1/4 60 9 4
      N46 Single Non 115 1 6.0 1/2 60 16 7
      N47 Single Non 115 1 3.0 1/3 60 10 4.6

    Pump Performance Curves

    Performance Curve, 40 Series: 60 Hz

    Performance Curve, 40 Series, 014066

    Performance Curve, 40 Series, 014066

     

    Dimensional Drawing Model 44, EA0034

    Dimensional Drawing Model 44, EA0034

     


    EA0035, Dimensional Drawing, Model 44

    Dimensional Drawing Model 42, EA0035

    Dimensional Drawing Model 42, EA0035

  • Use fully or partially submerged
  • Durable, polypropylene housing
  • 3-prong power cord, 9′ or 20′ (3 or 6 m)
  • High-quality, sealed motor
  • Thermal overload protected motor
  • Model 42 is adaptable for use with standard garden hose (fitting included), 1″ NPT pipe or 1-1/4″ slip fit (use discharge hose kit P/N 1010-0117)
  • Model 44 (60 Hz) is adaptable for use with standard garden hose (fitting included), 1-1/4″ female NPT or 3/4″ female NPT adapter
  • Model LM44 (60 Hz) with automatic operation. Utility applications only*
  • Model 46 (60 Hz) has a 2″ NPT discharge with a 2″ hose adapter
  • Screened bottom may be removed to allow easy cleaning
  • Use indoors or outdoors
  • Typical applications: dewatering and filling
  • Oil-free (models 42 and 44 only)
  • Models 42 and 44 remove water from any flat surface down to 1/8″ (3 mm). Model 46 will pump down to 1″ (25 mm).
  • Light-weight and portable
  • Compact design: models 42 and 44 will fit in a 7″ (178 mm) opening. Model 46 will fit in an 8″ (203 mm) opening.
  • Temperature rating: 104 °F (40 °C)
  • 1 year limited warranty
Motor 1/6 – 1/2 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 3450 RPM
Type Permanent split capacitor
Insulation Class B
Amps 1.5 – 6.0 Amps
Operation Automatic and nonautomatic
Discharge Size Various
Cord Length 9 or 20′ (3 or 6 m) standard
Cord Type 3-prong
Max Head 33′ (10 m)
Max Flow Rate 3,300 GPH (12,492 LPH)
Max Operating Temperature 104 °F (40 °C)
Cooling Oil free or oil filled
Motor Protection Auto reset thermal overload
Motor Housing Engineered plastic
Base Engineered plastic
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Enginnered plastic
Hardware Stainless steel
Motor Shaft SUS 416 stainless steel
Gasket NBR
 

cCSAus      SSPMA

Model Comparison Charts

  • Product
    Model Comparison Chart: 60hz

    model seal mode volts phase amps hp hz lbs kg
    N42 Single Non 115 1 1.5 1/6 60 7 3
    LM44 Single Auto 115 1 2.5 1/4 60 9 4
    N44 Single Non 115 1 2.5 1/4 60 9 4
    N45 Single Non 115 1 2.5 1/4 60 9 4
    N46 Single Non 115 1 6.0 1/2 60 16 7
    N47 Single Non 115 1 3.0 1/3 60 10 4.6

Pump Performance Curves

Performance Curve, 40 Series: 60 Hz

Performance Curve, 40 Series, 014066

Performance Curve, 40 Series, 014066

 

Dimensional Drawing Model 44, EA0034

Dimensional Drawing Model 44, EA0034

 


EA0035, Dimensional Drawing, Model 44

Dimensional Drawing Model 42, EA0035

Dimensional Drawing Model 42, EA0035