• A high temperature, submersible pump series with electrical components meeting the National Electrical Code requirements for 200 °F (93 °C) service
• Comprehensive line of models, styles and modes
• Conduit length is 3′ (0.9 m) for automatic models and 6′ (1.8 m) for non-automatic models
• Power cord length is 15′ (5 m) for automatic models and supplied by others for non-automatic models
• High temperature liquid-tight conduit used with high temperature cable
• High temperature motor windings
• High temperature Viton^® gaskets
• High temperature thermal overload protected
• All control components in contact with water are high temperature rated
• All models have stainless steel screws, guards, handles and control arm and seal assemblies
• Float-operated mechanical switch box, which is mounted on the discharge pipe above the operating level (switch box is not intended to come in continuous contact with 200 °F [93 °C] water)
• Mechanical seal has NI-Resist rotary face and Viton^® elastomer
• Corrosion-resistant, powder coated epoxy finish
• 1 year limited warranty

Notes

1. Cable from disconnect to control box (customer furnished) should be rated 221 °F.
2. Nonautomatic models available with 6 ft (1.8 m) of high temperature liquid-tight conduit cable (200 °F / 93 °C) and a watertight junction box for outdoor or above the waterline installation.
3. The maximum ‘On’ levels can be extended for automatic pumps by adding additional cord and conduit length. Float rods are extended in 1 ft increments. Order an extender kit P/N 10-0656 for each additional foot of length desired.