Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!


Potable Water Turbine Pumps

Potable Water Systems // A Series

Potable Water Turbine Pumps

Stainless steel or cast iron, 4" submersible pumps

Features and Benefits

  • Stainless steel pump shell, motor shell and drive shaft
  • Quiet and economical operation
  • No priming required
  • Submersible pumps rated by the number of gallons per minute to the well head from various water level depths. Models rated at 5 & 7 GPM (22.7 and 31.8 LPM) are for small homes, cottages and light water usage demands, whereas the 11 and 19 GPM (41.6 and 71.9 LPM) models are for the average residential size home and family.
  • Nationally known Franklin 1/2 thru 1 HP motors used on Zoeller submersible pumps are designed to meet NEMA standards. All models are available with either 2 or 3 wire connection plus ground wire.
  • 1-1/4” cast iron discharge head prevents cross threading and cracking in the well
  • Corrosion-resistant 304 stainless steel pump shell
  • NEMA-faced mounting ring for long life and protection from motor torque
  • Stainless steel hex drive shaft with one-piece stainless steel motor to shaft coupling
  • Franklin Electric® NEMA standard 2 or 3 wire water-cooled motor with ground wire (not shown)
  • Includes internal positive sealing check valve
  • Non-fusing and corrosion-resistant impellers, diffusers and inlet screen molded of Noryl® resin
  • Noryl® is a registered trademark of General Electric company
  • Control box required for 3-wire models. Quick-disconnect control box features replaceable snap out cover and keeps all components above ground for easy access and repair. Control box not required for 2-wire models.
  • 7, 11 and 19 GPM (31.8, 50 and 86.4 LPM) models available
  • For use in potable clean water systems only
  • 1 year limited warranty


Product may not be exactly as shown.

Reserve Powered Design.

For unusual conditions, a reserve safety factor is engineered into the design of every Zoeller pump.

Product Specifications

Motor 1/2 - 1 HP
Voltage 115 or 230 V
Discharge Size 1-1/2"
Cord Type 2 or 3-wire
Cooling Water
Pump Housing Stainless steel
Impeller Type Non-fusing, corrosion-resistant
Motor Shaft Stainless Steel
  • cCSAus