932 Replacement Assembly
932 Replacement Assembly
Simplex replacement system for positive displacement grinder pumps
Features and Benefits
- Readily adapts to existing progressing cavity grinder pump systems
- Electrical Quick-Disconnect (EQD) coupling, rectangular or round, for mating onto existing system
- RE810 System with J-Box for externally connected pump control and alarm switch
- RWD810 System with internally mounted Dual Action Y-spliced floats, no J-Box required
- cCSAus listed pump
- Finned class 30 cast iron construction
- Corrosion-resistant, powder coated epoxy finish
- Discharge size - 1-1/4” NPT
- Oil-filled, hermetically-sealed motor
- Hardened stainless steel cutter and disc, Rockwell C55-60
- Stainless steel hydraulic rotor
- Pressure relief valve, 200 psi, wog rated
- Anti-siphon device
- Upper and lower ball bearing construction
- Carbon/ceramic mechanical seal
- Pump control and high water alarm switch
- Integral thermal overload protection with automatic reset
- 20' electrical cable length
- 2 year limited warranty on the 810 grinder pump
Product Specifications
| Motor | 1 HP | |
| Voltage | 230 V or 200 V (2 HP Only) | |
| Phase | 1 Ph | |
| Hertz | 60 Hz | |
| RPM | 1750 RPM | |
| Discharge Size | 1-1/4" NPT | |
| Cord Length | 20' (6 m) standard | |
| Cord Type | Electrical cord with Quick Disconnect receptacle fitting | |
| Motor Housing | Cast iron | |
| Pump Housing | Cast iron | |
| Mechanical Seals | Carbon and ceramic | |
|
|
||
