Welcome to our NEW website!

X

80 Series

img-title
Utility, Pedestal // Old Faithful

80 Series

Dewatering and sump pedestal pump.

Features and Benefits

  • Metal enclosed, split phase motor, permanently lubricated, thermal overload protected
  • Heavy-duty thermoplastic or cast iron constructed pump housing and base
  • Top intake strainer is part of pump housing, passes lint
  • No strainer to deteriorate, replace or periodically clean
  • Model 81 - 1-1/4” FPT discharge
  • Models 82 and 84 - 1-1/2” FPT discharge
  • High-impact, PVC (1-1/2” OD) column
  • Non-corrosive shaft
  • Reliable positive-displacement switch
  • Chemically-resistant, polyethylene float
  • Plated steel float rod
  • Nylon guide
  • Permanently-lubricated upper sleeve bearing
  • Durable lower bronze bushing
  • Adjustable 12” cycle, factory set at 9” (22.8 cm)
  • Max. on: 16” (41 cm)
  • Min. off: 4” (10 cm)
  • Temperature rating: 130 °F (54 °C)
  • Minimum pit size recommended: 18” x 22” (45.7 x 55.8 cm)
  • Model 81: Thermpolastic, 3/10 HP
  • Model 82: Cast iron, 1/3 HP
  • Model 84: Cast iron, 1/2 HP

Notes 

This unit is designed for indoor applications where the motor is mounted above the pit cover and protected from water, water spray and high humidity. Pump is not intended for use with flammable liquids.



Product may not be exactly as shown.

Product Specifications

Motor 1/3 or 1/2 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 1725 RPM
Type Split phase
Amps 4.0 - 7.3 Amps
Operation Automatic
Auto On / Off Points Adjustable
Discharge Size 1-1/4" or 1-1/2" FPT
Cord Length 7-1/2' (2.3 m)
Cord Type UL listed, 3-wire cord and plug
Max Head 16' (4.9 m), 21' (6.4 m), 24' (7.3 m)
Max Flow Rate 50 GPM (189 LPM), 59 GPM (223 LPM)
Max Operating Temperature 130 °F (54 °C)
Cooling Air
Motor Protection Auto reset thermal overload
Pump Housing Heavy duty thermosplastic or cast iron
Upper Bearing Permanently lubricated sleeve bearing
Lower Bearing Bronze bushing
Impeller Type Non-clogging
Impeler Engineered thermoplastic
  • 60Hz
  • cCSAus
  • SSPMA

Technical Data

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    M81 Auto 115 1 4.0 1/3 60 15 7
    M82 Auto 115 1 5.7 1/3 60 19 9
    M84 Auto 115 1 7.3 1/2 60 22.5 10.2

Pump Performance Curves