Qwik Jon® Ultima Toilet Grinder
Qwik Jon® Ultima Toilet Grinder
Install a full or half bathroom just about anywhere! Designed to handle a toilet, sink, tub, and/or shower, even when gravity drains are not an option.
Features and Benefits
Install a bathroom just about anywhere with the Qwik Jon Ultima!
- Contains 1/2 HP (0.7 kW) mini grinder pump - not a macerator
- Preassembled pump and tank for easy installation
- Model 202 includes a comfort-height, ADA-compliant, Zoeller rear-discharge toilet with elongated bowl, or you can use Model 203 (60 Hz only) Ultima with a variety of rear outlet toilet styles
- Can be installed either free-standing or behind a wall with the 2" MPT or 1-1/2" internal slip side inlets
- No need to destroy concrete floors
- No need to elevate floor
- Designed for a full or a half bathroom, this system can accommodate a toilet, lavatory, bathtub and/or shower.
- Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
- Reduces construction costs
- 1” discharge (can be reduced to 3/4” to replace existing systems)
- Pumps any direction
- Patent Nos. 7,203,976; 2,512,023; 9,352,327; 8,562,287
- 1.6 GPF (6.1 LPF)
- Hardware to mount toilet to floor sold by others
Qwik Jon® Ultima features
- Non-corrosive, engineered thermoplastic, mini grinder pump
- Premium grinder blade: Investment-cast 440 stainless steel cutter plate is engineered to handle cloth, latex and other hard to grind materials. Tri-Slice® Cutter Technology - three independent cutting channels provide over 250,000 cuter per minute.
- Pump 100% factory tested after assembly
- Automatic reset thermal overload protected
- Hardened stainless steel cutter and disc
- Carbon/ceramic mechanical shaft seal
- Upper and lower ball bearing running in a bath of oil
- All stainless steel hardware
- ABS tank with 2” MPT of 1-1/2” slip side inlets
- Preassembled with preset piggyback vertical float switch
- Two models available, complete with toilet (model 202) or tank only adaptable to standard rear outlet toilets (model 203)
This system includes
- Model 202: tank, mini grinder pump and a comfort height, ADA-compliant toilet with elongated bowl
- Model 203 : tank and mini-grinder pump (standard rear outlet toilet with a discharge height of 4" (10 cm) from floor to centerline must be purchased separately)
Mini-grinder pump features
- Automatic level control switch
- Thermal overload protected motor
- Stainless steel screws, bolts and handle
- Non-clogging vortex impeller
- UL listed, 3-wire, neoprene 9' (3 m) cord and plug
- Maximum temperature: 130 °F (54 °C)
Tank features
- Durable ABS tank with white finish
- Light-weight
- Built-in check valve
Items included
- Comfort-height, ADA-compliant toilet with elongated bowl (model 202 only)
- Tank, lid and gasket
- 1/2 HP mini grinder pump
- Back-flow device (check local codes)
- 1” discharge and 1-1/2” vent
- Extension kit (model 203)
- Hardware pack
- Installation instructions
- Model 202 shipping weight: 121 lbs (55 kg)
- Model 203 shipping weight: 37 lbs (17 kg)
Items needed by the installer
- Supply fittings and waste pipe
- Toilet (model 203 only)
- Toilet seat
- Electrical source with ground fault interrupter (GFCI) protected receptacle
- Water supply
- Tools
Notes
Patent Numbers. 7,203,976; 2,512,023; 8,562,287
Model 203 not compatible with Zoeller rear outlet toilet.
These pumps not designed for use in any other application.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Model 202 meets the Americans with Disabilities Act guidelines and ANSI A117.1 requirements for accessible and usable facilities—check local codes.
Product Specifications
| Motor | 1/2 HP | |
| Voltage | 115 V | |
| Phase | 1 Ph | |
| Hertz | 60 Hz | |
| RPM | 3450 RPM | |
| Amps | 3.5 A | |
| Discharge Size | 1" | |
| Cord Length | 9' (3 m) | |
| Cord Type | UL listed, 3-wire neoprene cord and plug | |
| Max Operating Temperature | 130 °F (54 °C) | |
| Motor Protection | Thermal overload | |
| Mechanical Seals | Carbon and ceramic | |
| Impeller Type | Non-clogging vortex | |
| Hardware | Stainless steel | |
|
|
||
Technical Data
Caution
All installations of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA). Must be installed per local codes.
Model Comparison Charts
- Product Model Comparison Chart: 60hz
model seal mode volts phase amps hp hz lbs kg WB202 Auto 220 1 60 30 14