150 Series Effluent Pumps
150 Series Effluent Pumps
Effluent or dewatering submersible pump for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems.
Features and Benefits
- Durable, cast iron construction
- Model 151 (60 Hz) comes standard with a glass-filled, polypropylene base
- Corrosion-resistant, powder coated epoxy finish
- Stainless steel lifting handle
- Assembled with stainless steel bolts
- Non-clogging, engineered thermoplastic, vortex impeller design
- Model 151 (60 Hz) - 1/3 HP, passes 1/2" (13 mm) spherical solids
- Model 152 - 4/10 HP (0.56 KW), passes 3/4" (19 mm) spherical solids
- Model 153 - 1/2 HP (0.71 KW), passes 3/4" (19 mm) spherical solids
- Motor - 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected
- Carbon/Ceramic seals
- Upper sleeve bearing and lower ball bearing running in bath of oil
- 20' (6 m), UL listed power cord with molded, 3-wire plug
- 1-1/2" NPT vertical discharge
- BN and BE standard models include a 20' (6 m), variable level float switch
- Operates at temperatures to 130 °F (54 °C) in effluent applications
- All models include a 1-1/2" x 2" PVC adapter fitting
Consult Factory for Special Applications:
- Timed dosing panels
- Electrical alternators for duplex systems are available and supplied with an alarm
- Variable level control switches are available for controlling 1 Ph systems
- Double piggyback, variable level float switches are available for variable level, long and short cycle controls
- Sealed Qwik-Box available for outdoor installations - See FM1420
- Over 130 °F (54 °C) - special quotation required
Product Specifications
Motor | 1/3 - 1/2 HP | |
Voltage | 115 or 230 V | |
Phase | 1 Ph | |
Hertz | 60 Hz | |
RPM | 3450 RPM | |
Type | Permanent split capacitor | |
Insulation | Class B | |
Amps | 3.2 - 10.5 Amps | |
Operation | Automatic or nonautomatic | |
Discharge Size | 1-1/2" NPT | |
Solids Handling | 151: 1/2" (13 mm), 152/153: 3/4" (19 mm) spherical solids | |
Cord Length | 20' (6 m) standard | |
Cord Type | UL Listed power cord | |
Max Head | 44' (13.4 m) | |
Max Flow Rate | 77 GPM (291 LPM) | |
Max Operating Temperature | 130 °F (54 °C) | |
Cooling | Oil filled | |
Motor Protection | Auto reset thermal overload | |
Cap | Cast iron | |
Motor Housing | Cast iron | |
Pump Housing | Cast iron | |
Base | Plastic or cast iron | |
Upper Bearing | Sleeve bearing | |
Lower Bearing | Ball bearing | |
Mechanical Seals | Carbon and ceramic | |
Impeller Type | Non-clogging vortex | |
Impeller | Engineered thermoplastic | |
Hardware | Stainless steel | |
Motor Shaft | AISI 1215 steel | |
Gasket | Neoprene | |
|
Technical Data
Caution
All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA).
Accessories
- Piggyback Variable Level Float Switch
- Simplex Electrical Control Panels
- Variable Level Control Switch
- Pump Stand
Model Comparison Charts
- Product Model Comparison Chart: 60hz
model seal mode volts phase amps hp hz lbs kg N151 Single Non 115 1 6.0 1/3 60 32 15 E151 Single Non 230 1 3.2 1/3 60 32 15 BN151 Single Auto 115 1 6.0 1/3 60 33 15 BE151 Single Auto 230 1 3.2 1/3 60 33 15 N152 Single Non 115 1 8.5 0.4 60 37 17 E152 Single Non 230 1 4.3 0.4 60 37 17 BN152 Single Auto 115 1 8.5 0.4 60 39 18 BE152 Single Non 230 1 4.3 0.4 60 39 18 N153 Single Non 115 1 10.5 1/2 60 37 17 BN153 Single Auto 115 1 10.5 1/2 60 39 18 E153 Single Non 230 1 5.3 1/2 60 37 17 BE153 Single Non 230 1 5.3 1/2 60 39 18