Welcome to our NEW website!

X

150 Series

img-title
Sump and Effluent Pumps // Effluent Pumps // High Head Dose-Mate

150 Series

For septic tank, low pressure pipe (LPP) and enhanced flow STEP systems

Features and Benefits

  • Durable, cast iron construction
  • Model 151 (60 Hz) comes standard with a glass-filled, polypropylene base
  • Corrosion-resistant, powder coated epoxy finish
  • Stainless steel lifting handle
  • Assembled with stainless steel bolts
  • Non-clogging, engineered thermoplastic, vortex impeller design
  • Model 151 (60 Hz) - 1/3 HP, passes 1/2" (13 mm) spherical solids
  • Model 152 - 4/10 HP (0.56 KW), passes 3/4" (19 mm) spherical solids
  • Model 153 - 1/2 HP (0.71 KW), passes 3/4" (19 mm) spherical solids
  • Motor - 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected
  • Carbon/Ceramic seals
  • Upper sleeve bearing and lower ball bearing running in bath of oil
  • 20' (6 m), UL listed power cord with molded, 3-wire plug
  • 1-1/2" NPT vertical discharge
  • BN and BE standard models include a 20' (6 m), variable level float switch
  • Operates at temperatures to 130 °F (54 °C) in effluent applications
  • All models include a 1-1/2" x 2" PVC adapter fitting

Consult Factory for Special Applications:

  • Timed dosing panels
  • Electrical alternators for duplex systems are available and supplied with an alarm
  • Variable level control switches are available for controlling 1 Ph systems
  • Double piggyback, variable level float switches are available for variable level, long and short cycle controls
  • Sealed Qwik-Box available for outdoor installations - See FM1420
  • Over 130 °F (54 °C) - special quotation required

Product Specifications

Motor 1/3 - 1/2 HP
Voltage 115 or 230 V
Phase 1 Ph
Hertz 60 Hz
RPM 3450 RPM
Type Permanent split capacitor
Insulation Class B
Amps 3.2 - 10.5 Amps
Operation Automatic or nonautomatic
Discharge Size 1-1/2" NPT
Solids Handling 151: 1/2" (13 mm), 152/153: 3/4" (19 mm) spherical solids
Cord Length 20' (6 m) standard
Cord Type UL Listed power cord
Max Head 44' (13.4 m)
Max Flow Rate 77 GPM (291 LPM)
Max Operating Temperature 130 °F (54 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Plastic or cast iron
Upper Bearing Sleeve bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeler Engineered thermoplastic
Hardware Stainless steel
Motor Shaft AISI 1215 steel
Gasket Neoprene
  • 60Hz
  • cCSAus
  • SSPMA
  • Powder Coated Tough

Technical Data

CAUTION

All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA).

ACCESSORIES

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    N151 Single Non 115 1 6.0 1/3 60 32 15
    E151 Single Non 230 1 3.2 1/3 60 32 15
    BN151 Single Auto 115 1 6.0 1/3 60 33 15
    BE151 Single Auto 230 1 3.2 1/3 60 33 15
    N152 Single Non 115 1 8.5 0.4 60 37 17
    E152 Single Non 230 1 4.3 0.4 60 37 17
    BN152 Single Auto 115 1 8.5 0.4 60 39 18
    BE152 Single Non 230 1 4.3 0.4 60 39 18
    N153 Single Non 115 1 10.5 1/2 60 37 17
    BN153 Single Auto 115 1 10.5 1/2 60 39 18
    E153 Single Non 230 1 5.3 1/2 60 37 17
    BE153 Single Non 230 1 5.3 1/2 60 39 18

Pump Performance Curves

Design Tools