Zoeller Pump Company has partnered with Contractor Rewards to offer you rewards for your Zoeller Pump purchases!

X

Drain Pump Series

Package Systems and Basins

Drain Pump Series

Removes water from areas where gravity flow is not available such as laundry trays, wet bar sinks, lavatories, air conditioning condensate and dehumidifiers. Can also be used in conjunction with dishwashers and garbage disposal.

Features and Benefits

  • Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal.
  • No inlet filters or screens to clean
  • Optional top or side inlet
  • Can be installed with internal trap
  • Automatic pumps with tank cord seals
  • All hardware for easy assembly
  • Polypropylene basin and lid
  • Internal discharge pipe to lid (trap supplied by others)
  • Check valve (30-0181, not included with model 104)
  • Contact factory for additional inlet option or high head applications
  • Easy installation, no need to dig a sump
  • 132 comes preassembled

Pump features

Models 53®, 55, 57, 59, 98
  • Passes laundry lint
  • Automatic, float-operated mechanical switch
  • 9' (3 m), UL listed, 3-wire cord and plug (15' [5 m] cord standard on model 98)
  • Stainless steel screws, guard, handle and switch arm
  • Passes 1/2” (12.7 mm) spherical solids
  • 1-1/2” NPT discharge
  • 1550 RPM on 50 series
  • 1725 RPM on model 98
  • Non-clogging vortex impeller
  • Glass-filled, polypropylene base with built-in strainer
  • Model 59 - all bronze construction
  • Models 57 and 98 - all cast iron construction
  • Temperature rated 130 °F (55 °C)
  • UL and cCSAus listed pump
Model 72
  • Passes laundry lint
  • 9' (3 m), UL-listed, 3-wire cord and plug
  • Stainless steel screws, switch arm and lower motor housing
  • Oil-free
  • Passes 3/8” (9.5 mm) spherical solids
  • 1-1/2” NPT discharge
  • 3400 RPM
  • Non-clogging vortex impeller
  • Temperature rated 110 °F (43 °C)
  • cCSAus listed pump

Basin

  • Polypropylene construction
  • Corrosion-resistant
  • High capacity
  • Gasket-sealed polypropylene lid
  • 2” NPT vent
  • 1-1/2” NPT discharge
  • 1-1/2” compression slip fit for top and side intake. Note: 132 comes preassembled, for side inlet only
  • Threaded connections for easy installation
  • May be installed with internal trap for space savings
  • Gas-tight cover
  • Temperature rated 130 °F (55 °C)
  • Fits under most sinks
  • Basin passes 10’ (3 m) stack test – Models 104 and 132 will not pass 10’ (3 m) stack test

Check valve (excluding model 104) (30-0181)

  • “Full Flow” design
  • 1-1/2” or 1-1/4" slip x slip union
  • PVC construction
  • For additional specifications, see FM0217.

Notes

Product may not be exactly as pictured.

For additional inlet option or high head applications, consult factory.

Reserve Powered Design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Product Specifications

Motor 1/3 - 1/2 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 1550 - 3400 RPM
Discharge Size 1-1/2" NPT
Solids Handling 0.5" (1.27 cm) spherical
Cord Length 9 ft (3m) or 15 ft (5m) standard
Cord Type UL listed, 3-wire cord and plug
Max Operating Temperature 130 °F (55 °C)
Motor Housing Bronze or cast iron
Pump Housing Bronze or cast iron
Base Glass-filled polypropylene, bronze or cast iron
Impeller Type Non-clogging vortex
Hardware Stainless steel
  • UL
  • 60Hz
  • SSPMA
  • UPC

Technical Data

Warning

To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug. FOR ABOVE-GROUND INSTALLATION ONLY.

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    M72 (104) Single Auto 115 1 2.2 1/2 60 19 9
    M53® (105) Single Auto 115 1 5.2 1/3 60 30 14
    M55 (110) Single Auto 115 1 5.2 1/3 60 33 15
    M57 (115) Single Auto 115 1 1/3 60 35 16
    M59 (120) Single Auto 115 1 1/3 60 38 17
    M72 (132) Single Auto 115 1 2.2 1/2 60 19 9
    M98 (131) Single Auto 115 1 4.7 1 60 47 22

Pump Performance Curves

Design Tools

Sales and Marketing