Welcome to our NEW website!

X

810, 815 Series

img-title
Grinder Pumps and Packages // Progressing Cavity Grinder Pumps // Shark® Series

810, 815 Series

Progressing cavity grinder pump

Features and Benefits

  • Finned, class 30 cast iron construction
  • Oil-filled, hermetically-sealed motor with Class B windings
  • Hardened stainless steel cutter and disc, Rockwell C55-60
  • Stainless steel hydraulic pump rotor
  • Pressure relief valve
  • Upper and lower ball bearing construction
  • Carbon/ceramic mechanical seal
  • Integral thermal overload protection with automatic reset
  • Stainless steel mounting stand for free-standing installation
  • Preassembled systems available

Standard Features:

  • 1-1/4” NPT discharge
  • Carbon/ceramic tandem seals
  • Hydraulic stainless steel rotor and Buna N stator
  • Stainless steel cutter plate/cutter
  • Stainless steel shaft and hardware
  • Corrosion-resistant, powder coated epoxy finish
  • 20' (6 m) power cord. 25', 35' and 50' (8 m, 11 m, 15 m) options available

Notes 
Product may not be exactly as pictured.

Note: All variable level float switches in this section are mechanically activated and do not contain mercury.

922 Packaged Systems: Refer to FM2370 for packaged fiberglass or poly-ribbed basin assemblies for the models 810 and 815.

Product Specifications

Motor 1 - 2 HP
Voltage 230 V
Phase 1 Ph
Hertz 60 Hz
RPM 1750 RPM
Type Permanent split capacitor
Insulation Class B
Amps 6.0 - 10.5 Amps
Operation Nonautomatic
Discharge Size 1-1/4" NPT
Cord Length 20' (6 m) standard
Cord Type 3-wire neoprene
Max Head 810: 150' (45.7 m), 815: 240' (73.2 m)
Max Flow Rate 14.6 GPM (55 LPM)
Max Operating Temperature 130 °F (54 °C)
Cooling Oil filled
Motor Protection Auto reset thermal overload
Cap Cast iron
Motor Housing Cast iron
Pump Housing Cast iron
Base Stainless steel stand
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Hydraulic rotor
Impeler Stainless steel
Hardware Stainless steel
Motor Shaft Stainless steel
Gasket Neoprene
  • 60Hz
  • cCSAus
  • Powder Coated Tough
  • SWPA

Technical Data

Accessories for Field Assembled Systems:

  • Flex-hose discharge assembly, P/N 10-2038 with 30" (76 cm) hose
  • Square guide rail system, P/N 39-0106 48” (122 cm) deep basin, P/N 39-0107 60” (152 cm) deep basin, P/N 39-0108 72” (183 cm) deep basin
  • Rail extension bracket P/N 39-0070
  • Stainless steel lifting cables and rod P/N 39-0031 8’ (2.4 m) cable, P/N 39-0032 12’ (3.7 m) cable, P/N 39-0069 1’ (0.3 m) rod
  • Pre-wired conduit (10-0580 Qwik Box required) 5100-0016 – 25’ (8 m), 5100-0017 – 35’ (11 m), 5100-0018 – 50’ (15 m)
  • Galvanized 1.25” discharge elbow P/N 018386
  • Check valve P/N 30-0223 1.25” NPT brass
  • Ball valve P/N 30-0165 1.25” PVC

Model Comparison Charts

Pump Performance Curves

Design Tools