Welcome to our NEW website!

X

160 Series Effluent Pumps

Automatic

Sump and Effluent Pumps // Commercial Use Sump and Effluent Pumps // High Head Flow-Mate

160 Series Effluent Pumps

Effluent or dewatering submersible pumps for septic tanks, low pressure pipe (LPP) and enhanced flow STEP systems.

Features and Benefits

  • Durable, cast iron constructed switch case, base, motor and pump housing
  • Cast iron Class 25-30 (25,000X tensile strength)
  • Impeller - bronze class 85-5-5-5
  • Corrosion-resistant, powder coated epoxy finish
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 Ph only) motor
  • Upper and lower ball bearing running in bath of oil
  • Carbon and ceramic shaft seal
  • SAE 1117 carbon steel motor shaft (single seal models only)
  • Maximum temperature for effluent or dewatering: 130 °F (54 °C) (E/D: 140 °F / 60 °C)
  • Major width: 12-3/4" (32 cm)
  • Major height: 19-5/16" (49 cm)
  • No screens to clog
  • Neoprene square ring and gasket
  • Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
  • Passes 3/4” (19 mm) spherical solids
  • 1-1/2” NPT discharge with 2” or 3” flange available
  • Automatic units available with float-operated, submersible, 2-pole mechanical switch
  • On: point 14-3/4” (37.5 cm)
  • Off: point 5” (12.7 cm)
  • 100% of units are computerized tested

Models 4161, 4163, 4165 double seal pumps available (60 Hz, non-automatic only):

  • Protects motor from seal leaks
  • Improved bearing lubrication
  • Helps eliminate seal and bearing damage from dry runs
  • 416 stainless steel motor shaft
  • Major width: 12-3/4” (32 cm)
  • Major height: 21-3/16” (53.8 cm)

Product Specifications

60hz 50hz
Motor 1/2 or 1 HP 1.2 - 2.0 kW
Voltage 115 - 575 V 220 V or 380 V
Phase 1 or 3 Ph 1 Ph or 3 Ph
Hertz 60 Hz 50 Hz
RPM 3450 RPM 2800 RPM
Type Permanent split capacitor or 3 phase Permanent split capacitor or 3 Ph
Insulation Class B Class B
Amps 2.4 - 15.5 Amps 2.0 - 9.6 A
Operation Automatic and nonautomatic Automatic or nonautomatic
Auto On / Off Points 15-3/4" / 5-1/4" (40 cm / 13.3 cm) 40.0 cm / 13.3 cm (15-3/4" / 5-1/4")
Discharge Size 1-1/2" NPT (optional 2" or 3" flange) 1-1/2" NPT (optional 2" or 3" NPT flange) (CE models with BSPT)
Solids Handling 3/4" (19 mm) spherical solids 19 mm (3/4") spherical solids
Cord Length 20' (6 m) standard 6 m (20') standard
Cord Type UL listed, 3-wire neoprene cord and plug (1 Ph) or 4-wire cord with no plug (3 Ph) SOW/SOOW (CE model H07RN-F)
Max Head 86.5' (26 m) 23.6 m (77.4')
Max Flow Rate 100 GPM (379 LPM) 23.6 m3/hr (104 GPM)
Max Operating Temperature 130 °F (54 °C) 54° C (130° F)
Cooling Oil filled Oil filled
Motor Protection Auto reset thermal overload (1 Ph) Auto reset thermal overload (1Ph)
Cap Cast iron Cast iron
Motor Housing Cast iron Cast iron
Pump Housing Cast iron Cast iron
Base Cast iron Cast iron
Upper Bearing Ball bearing Ball bearing
Lower Bearing Ball bearing Ball bearing
Mechanical Seals Carbon and ceramic Carbon and ceramic
Impeller Type Non-clogging vortex Non-clogging vortex
Impeller Bronze Bronze
Hardware Stainless Steel Stainless steel
Motor Shaft SAE 1117 carbon steel or 416 stainless steel* SAE 1117 carbon steel
Gasket Neoprene square ring & gasket Neoprene
  • 151328 63
  • Cert 60Hz
  • Cert Sa
  • Cert Sspma
  • Cert Tough
  • 50Hz
  • Ce
  • Cert Tough

Technical Data

CAUTION

All installation of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA).

SELECTION GUIDE

  1. Integral float operated mechanical switch, no external control required.
  2. For automatic use, single piggyback variable level float switch or double piggyback variable level float switch. Refer to FM0477.
  3. See FM1228 for correct model of simplex control panel.
  4. See FM0712 for correct model of duplex control panel.
  5. To select an appropriate basin, go to Basins.

ACCESSORIES

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    M161 Single Auto 115 0 15.5 1/2 60 80 36
    N161 / N4161 Single / Double Non 115 1 15.0 / 15.5 1/2 60 80 / 87 36 / 39
    BN161 Single Auto 115 0 15.0 1/2 60 84 38
    D161 Single Auto 230 1 7.5 1/2 60 80 36
    E161 / E4161 Single / Double Non 230 0 7.5 1/2 60 80 / 87 36 / 39
    H161 Single Auto 200 0 8.8 1/2 60 80 36
    I161 / I4161 Single / Double Non 200 0 8.8 1/2 60 80 / 87 36 / 39
    J161 / J4161 Single / Double Non 200 3 6.4 1/2 60 80 / 87 36 / 39
    F161 / F4161 Single / Double Non 230 3 5.2 1/2 60 80 / 87 36 / 39
    G161 / G4161 Single / Double Non 460 3 2.9 1/2 60 80 / 87 36 / 39
    BA161/BA4161 Single / Double Non 575 3 2.4 1/2 60 80 / 87 36 / 39
    BE161 Single Auto 230 1 15.0 1/2 60 84 38
    M163 Single Auto 115 0 15.0 1/2 60 80 36
    N163 / N4163 Single / Double Non 115 0 15.0 1/2 60 80 / 87 36 / 39
    BN163 Single Auto 115 0 15.0 1/2 60 84 38
    D163 Single Auto 230 0 7.5 1/2 60 80 36
    E163 / E4163 Single / Double Non 230 0 7.5 1/2 60 80 / 87 36 / 39
    F163 / F4163 Single / Double Non 230 3 4.8 1/2 60 80 / 87 36 / 39
    H163 Single Auto 200 1 8.5 1/2 60 80 36
    I163 / I4163 Single / Double Non 200 1 8.5 1/2 60 80 / 87 36 / 39
    J163 / J4163 Single / Double Non 200 3 6.0 1/2 60 80 / 87 36 / 39
    G163 / G4163 Single / Double Non 460 3 2.9 1/2 60 80 / 87 36 / 39
    BA163/BA4163 Single / Double Non 575 3 2.4 1/2 60 80 / 87 36 / 39
    BE163 Single Auto 230 0 7.5 1/2 60 84 38
    D165 Single Auto 230 1 10.2 1 60 80 36
    E165 / E4165 Single / Double Non 230 1 10.2 0 60 80 / 87 36 / 39
    H165 Single Auto 200 0 12.6 1 60 80 36
    I165 / I4165 Single / Double Non 200 0 12.6 1 60 80 / 87 36 / 39
    J165 / J4165 Single / Double Non 200 3 7.5 1 60 80 / 87 36 / 39
    F165 / F4165 Single / Double Non 230 3 7.4 0 60 80 / 87 36 / 39
    G165 / G4165 Single / Double Non 460 3 3.7 1 60 80 / 87 36 / 39
    BA165/BA4165 Single / Double Non 575 3 3.0 1 60 80 / 87 36 / 39
    BE165 Single Auto 230 0 10.2 0 60 84 38
  • Product Model Comparison Chart: 50hz
    model seal mode volts phase amps kw hz lbs kg
    U161 Single Auto 220 1 5.6 1.2 50 84 38
    V161 Single Non 220 1 5.6 1.2 50 82 37
    AK161 Single Non 380 3 2.0 1.2 50 84 38
    U162 Single Auto 220 0 8.0 1.7 50 84 38
    V162 Single Non 220 0 8.0 1.7 50 82 37
    AK162 Single Non 380 3 3.0 1.8 50 82 37
    U163 Single Auto 220 0 6.4 1.5 50 84 38
    V163 Single Non 220 0 6.4 1.5 50 84 38
    AK163 Single Non 380 3 2.9 1.6 50 82 37
    U165 Single Auto 220 1 9.6 2.0 50 84 38
    V165 Single Non 220 0 9.6 2.0 50 82 37
    AK165 Single Non 380 3 2.0 1.8 50 82 37

Pump Performance Curves

Design Tools