Model 211 Sewage Pump

Sewage Pumps // Residential Use Sewage Pumps // Aqua-Mate

Model 211 Sewage Pump

Submersible pumps for sewage/effluent or dewatering, pass 2" spherical solids, 2" NPT discharge.

Features and Benefits

  • Non-corrosive engineered plastic motor housing, pump housing, base and impeller
  • Oil free
  • No sheet metal parts to rust or corrode
  • All stainless steel screws, switch arm and lower motor housing
  • 2 pole float operated mechanical switch
  • Solid polypropylene float
  • Maximum temperature for dewatering: 110 °F (43 °C)
  • Passes 2" (50 mm) spherical solids
  • 2" NPT discharge
  • On point: 13" (33 cm)
  • Off point: 5-3/4" (14.6 cm)
  • Major width: 9-5/16" (23.7 cm)
  • Major height: 15-7/8" (40.3 cm)
  • All models completely submersible and hermetically sealed
  • Watertight and dust tight
  • 1 year limited warranty

Models available:

  • Automatic
  • Nonautomatic

Consult factory for special applications:

  • Variable level float switches available
  • Variable level long cycle systems available
  • Alarm systems available

Recommended for 2" pipe only

The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

Reserve powered design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Product Specifications

60hz 50hz
Motor 4/10 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 3400 RPM
Type Permanent split capacitor
Insulation Class B
Amps 5.5 Amps
Operation Automatic or nonautomatic
Auto On / Off Points 13" / 5-3/4" (33 cm / 14.6 cm)
Discharge Size 2" NPT
Solids Handling 2" (50 mm) spherical solids
Cord Length 10' (3 m) auto, 15' (5 m) non auto
Cord Type UL listed, 3-prong plug
Max Head 19.5' (5.9 m)
Max Flow Rate 82 GPM (310 LPM)
Max Operating Temperature 110 °F (43 °C)
Cooling Oil free
Motor Protection Auto reset thermal overload
Motor Housing Engineered plastic
Pump Housing Engineered plastic
Base Engineered plastic
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex
Impeller Engineered plastic
Hardware Stainless steel
Motor Shaft 410 stainless steel
Gasket Buna-N O-Ring
  • Cert Sa
  • Cert Sspma