Welcome to our NEW website!

X

40 Series

img-title
Utility, Pedestal // Floor Sucker

40 Series

Use Floor Sucker utility pumps submerged or on any flat surface to pump clear water.

Features and Benefits

  • Use fully or partially submerged
  • Durable, polypropylene housing
  • 3-prong power cord, 9' or 20' (3 or 6 m)
  • High-quality, sealed motor
  • Thermal overload protected motor
  • Model 42 is adaptable for use with standard garden hose (fitting included), 1" NPT pipe or 1-1/4" slip fit (use discharge hose kit P/N 1010-0117)
  • Model 44 (60 Hz) is adaptable for use with standard garden hose (fitting included), 1-1/4" female NPT or 3/4" female NPT adapter
  • Model LM44 (60 Hz) with automatic operation. Utility applications only*
  • Model 46 (60 Hz) has a 2" NPT discharge with a 2" hose adapter
  • Screened bottom may be removed to allow easy cleaning
  • Use indoors or outdoors
  • Typical applications: dewatering and filling
  • Oil-free (models 42 and 44 only)
  • Models 42 and 44 remove water from any flat surface down to 1/8" (3 mm). Model 46 will pump down to 1" (25 mm).
  • Light-weight and portable
  • Compact design: models 42 and 44 will fit in a 7" (178 mm) opening. Model 46 will fit in an 8" (203 mm) opening.
  • Temperature rating: 104 °F (40 °C)

Product Specifications

60hz 50hz
Motor 1/6 - 1/2 HP 0.14 or 0.32 kW
Voltage 115 V 220 V
Phase 1 Ph 1 Ph
Hertz 60 Hz 50 Hz
RPM 3450 RPM 2850 RPM
Type Permanent split capacitor Permanent split capacitor
Insulation Class B Class B
Amps 1.5 - 6.0 Amps 0.6 - 1.4 A
Operation Automatic and nonautomatic Nonautomatic
Discharge Size Various 1" or 1-1/4" NPT (CE models with BSPT)
Cord Length 9 or 20' (3 or 6 m) standard 4.6 m (15') standard
Cord Type 3-prong
Max Head 33' (10 m) 6.1 m (20')
Max Flow Rate 3,300 GPH (12,492 LPH) 144 LPM (38 GPM)
Max Operating Temperature 104 °F (40 °C) 40 °C (104 °F)
Cooling Oil free or oil filled Oil free or Oil filled
Motor Protection Auto reset thermal overload Thermal overload
Motor Housing Engineered plastic Engineered plastic
Base Engineered plastic Engineered plastic
Upper Bearing Ball bearing Ball bearing
Lower Bearing Ball bearing Ball bearing
Mechanical Seals Carbon and ceramic Carbon and ceramic
Impeller Type Non-clogging vortex Non-clogging vortex
Impeler Enginnered plastic Engineered plastic
Hardware Stainless steel Stainless steel
Motor Shaft SUS 416 stainless steel SUS 416 stainless steel
Gasket NBR NBR
  • Cert 60Hz
  • Cert Sa
  • Cert Sspma
  • 50Hz
  • Ce

Technical Data

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    N42 Single Non 115 0 1.5 1/6 60 7 3
    LM44 Single Auto 115 0 2.5 1/4 60 9 4
    N44 Single Non 115 0 2.5 1/4 60 9 4
    N45 Single Non 115 0 2.5 1/4 60 9 4
    N46 Single Non 115 0 6.0 1/2 60 16 7
    N47 Single Non 115 0 3.0 1/3 60 10 4.6
  • Product Model Comparison Chart: 50hz
    model seal mode volts phase amps kw hz lbs kg
    V42 Single Non 220 0 0.6 0.14 50 4 9
    V47 Single Non 220 0 1.4 0.32 50 5 11

    Additional cord lengths are available in 6 m (20') and 10 m (33').  Power cords less than 10 m (33') on CE rated models are intended for indoor use only.
    All models are available with a 5 m (15') cord and a type G plug.
    Reserve Powered Design:  For unusual conditions, a reserve safety factor is engineered into the design of every pump.

Design Tools