Check out the Zoeller YouTube Channel for Webinars, Tips, Trainings, and Product Videos!


Qwik Jon® Ultima 204

Toilet Grinder Systems

Qwik Jon® Ultima 204

Economical lavatory and shower system designed for free-standing or built-in installation

Features and Benefits

Install a Qwik Jon® Ultima just about anywhere

  • Contains 1/2 HP mini-grinder pump
  • Dual cutting action provides over 70,000 cuts per minute (50 Hz: 60,000 cuts per minute), greatly reducing the potential for clogging and increasing pump reliability.
  • Preassembled pump and tank for easy installation
  • No need to destroy concrete floors
  • No need to elevate floor
  • Designed to accommodate a lavatory, bathtub and/or shower
  • Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
  • Reduces construction costs
  • 1” discharge (can be reduced to 3/4” to replace existing systems)
  • Pumps any direction
  • Can be installed either free-standing or behind a wall with the 2” MPT or 1-1/2” internal slip side inlets

Pump features

  • Automatic level control switch
  • Thermal overload protected motor
  • Stainless steel screws, bolts and handle
  • Non-clogging vortex impeller
  • UL listed, 3-wire, neoprene 9' (3m) cord and plug
  • Maximum temperature 130 °F (54 °C)

Tank features

  • Durable ABS tank with white finish
  • Light-weight
  • Built-in check valve

Items included

  • Tank, lid and gasket
  • 1/2 HP mini-grinder pump
  • Back-flow device (check local codes)
  • 1” discharge and 1-1/2” vent
  • Hardware pack
  • Installation instructions
  • Shipping weight: 33 lbs (15Kg)

Items needed by installer

  • Supply fittings and waste pipe
  • Electrical source with ground fault interrupter (GFCI) protected receptacle
  • Water supply
  • Tools

Patent Nos. 7,203,976; 2,512,023; 9,352,327; 8,562,287

These pumps not designed for use in any other application.

Product Specifications

60hz 50hz
Motor 1/2 HP 0.7 kW
Voltage 220 V
Phase 1 Ph
Hertz 60 Hz 50 Hz
RPM 2800 RPM
Type Permanent Split Capacitor
Insulation Class B
Amps 3.4 A
Operation Automatic
Discharge Size 1" 1" (CE models with BSPT)
Cord Length 9' (3 m)
Cord Type UL listed, 3-wire neoprene cord and plug
Max Operating Temperature 130 °F (54 °C)
Cooling Oil filled
Motor Protection Thermal overload Auto reset thermal overload
Cap Engineered thermoplastic
Motor Housing Cast iron
Pump Housing Engineered thermoplastic
Base Engineered thermoplastic
Upper Bearing Ball bearing
Lower Bearing Ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex Non-clogging vortex
Impeller Stainless steel Engineered plastic
Hardware Stainless steel
Motor Shaft AISI 1215 cold rolled steel
Gasket Closed cell tank gasket; BUNA-N pump gaskets
  • Cert Sa
  • 151328 63
  • Ce
  • Upc

Technical Data


All installations of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA). Must be installed per local codes.

Pump Performance Curves

Sales and Marketing

Sales Literature