490 Series

Specialty Products // High Head Waste-Mate

490 Series

Single-seal sewage pumps for high-head applications

Features and Benefits

  • For residential or light commercial
  • Transfer groundwater, effluent or un-screened, raw sewage.
  • Passes 38 mm (1-1/2") spherical solids
  • Powder coated epoxy finish
  • Ideal for applications with high total dynamic head
  • Hermetically sealed to be fully submersible
  • 100% factory tested

Product Specifications

60hz 50hz
Motor 3.15 or 4.1 KW 1.93 or 2.6 kW
Voltage 380 V 380 V
Phase 3 Ph 3 Ph
Hertz 60 Hz 50 Hz
RPM 3450 RPM 2800 RPM
Insulation Class B Class B
Amps 6.0 - 7.3 Amps 4.0 - 5.0 A
Operation Nonautomatic Nonautomatic
Discharge Size 2" PT 2" PT
Solids Handling 1-1/2" (38 mm) spherical solids 38 mm (1-1/2") spherical solids
Cord Length 20' (6 m) standard 6 m (20') standard
Max Head 80' (24.4 m), 90' (27.4 m) 16.8 m (55'), 19.8 m (65')
Max Flow Rate 186 GPM (703 LPM), 195 GPM (738 LPM) 622 LPM (164 GPM), 696 LPM (184 GPM)
Max Operating Temperature 130 °F (54 °C) 54 °C (130 °F)
Cooling Oil filled Oil filled
Cap Cast iron Cast iron or bronze
Motor Housing Cast iron Cast iron
Pump Housing Cast iron Cast iron
Base Cast iron Cast iron
Upper Bearing Ball bearing Ball bearing
Lower Bearing Ball bearing Ball bearing
Mechanical Seals Carbon and ceramic Carbon and ceramic
Impeller Type Non-clogging vortex Non-clogging vortex
Impeller Bronze Bronze
Hardware Stainless steel Stainless steel
Motor Shaft SAE 1117 carbon steel SAE 1117 carbon steel
Gasket Neoprene Synthetic rubber
  • 50Hz
  • Ce

Technical Data

Model Comparison Charts

Pump Performance Curves

Design Tools

Technical Support