Drain Pump Series

Package Systems and Basins

Drain Pump Series

Removes water from areas where gravity flow is not available such as laundry trays, wet bar sinks, lavatories, air conditioning condensate and dehumidifiers. Can also be used in conjunction with dishwashers and garbage disposal.

Features and Benefits

  • Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal.
  • No inlet filters or screens to clean
  • Optional top or side inlet
  • Can be installed with internal trap
  • Automatic pumps with tank cord seals
  • All hardware for easy assembly
  • Polypropylene basin and lid
  • Internal discharge pipe to lid (trap supplied by others)
  • Check valve (30-0181, not included with model 104)
  • Contact factory for additional inlet option or high head applications
  • Easy installation, no need to dig a sump
  • 132 comes preassembled

Pump features

Models 53, 55, 57, 59, 98
  • Passes laundry lint
  • Automatic, float-operated mechanical switch
  • 9' (3 m), UL listed, 3-wire cord and plug (15' [5 m] cord standard on model 98)
  • Stainless steel screws, guard, handle and switch arm
  • Passes 1/2” (12.7 mm) spherical solids
  • 1-1/2” NPT discharge
  • 1550 RPM on 50 series
  • 1725 RPM on model 98
  • Non-clogging vortex impeller
  • Glass-filled, polypropylene base with built-in strainer
  • Model 59 - all bronze construction
  • Models 57 and 98 - all cast iron construction
  • Temperature rated 130 °F (55 °C)
  • UL and cCSAus listed pump
Model 72
  • Passes laundry lint
  • 9' (3 m), UL-listed, 3-wire cord and plug
  • Stainless steel screws, switch arm and lower motor housing
  • Oil-free
  • Passes 3/8” (9.5 mm) spherical solids
  • 1-1/2” NPT discharge
  • 3400 RPM
  • Non-clogging vortex impeller
  • Temperature rated 110 °F (43 °C)
  • cCSAus listed pump

Basin

  • Polypropylene construction
  • Corrosion-resistant
  • High capacity
  • Gasket-sealed polypropylene lid
  • 2” NPT vent
  • 1-1/2” NPT discharge
  • 1-1/2” compression slip fit for top and side intake. Note: 132 comes preassembled, for side inlet only
  • Threaded connections for easy installation
  • May be installed with internal trap for space savings
  • Gas-tight cover
  • Temperature rated 130 °F (55 °C)
  • Fits under most sinks
  • Basin passes 10’ (3 m) stack test – Models 104 and 132 will not pass 10’ (3 m) stack test

Check valve (excluding model 104) (30-0181)

  • “Full Flow” design
  • 1-1/2” or 1-1/4" slip x slip union
  • PVC construction
  • For additional specifications, see FM0217.

Notes

Product may not be exactly as pictured.

For additional inlet option or high head applications, consult factory.

Reserve Powered Design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Product Specifications

60hz 50hz
Motor 1/3 - 1/2 HP 0.56 - 0.72 kW
Voltage 115 V 220 V
Phase 1 Ph 1 Ph
Hertz 60 Hz 50 Hz
RPM 1550 - 3400 RPM 1400 or 2850 RPM
Type Shaded pole or permanent split capacitor
Insulation Class B
Amps 2.0 - 3.8 A
Operation Automatic
Auto On / Off Points 18.7 cm / 9.2 cm (7-3/8" / 3-5/8"), 17.8 cm / 7.6 cm (7"/3")
Discharge Size 1-1/2" NPT 1-1/2" NPT
Solids Handling 0.5" (1.27 cm) spherical 12 or 19 mm (1/2" or 3/4") spherical solids
Cord Length 9 ft (3m) or 15 ft (5m) standard 3 m or 5 m (9' or 15') standard
Cord Type UL listed, 3-wire cord and plug 2-wire plus ground
Max Head 4.7 m (15.5')
Max Flow Rate 255 lpm (56 gpm)
Max Operating Temperature 130 °F (55 °C) 54 °C (130 °F)
Cooling Oil filled
Motor Protection Auto reset thermal overload
Cap Cast iron
Motor Housing Bronze or cast iron Cast iron
Pump Housing Bronze or cast iron Cast iron
Base Glass-filled polypropylene, bronze or cast iron Engineered plastic or cast iron
Upper Bearing Sleeve bearing
Lower Bearing Sleeve bearing or ball bearing
Mechanical Seals Carbon and ceramic
Impeller Type Non-clogging vortex Non-clogging vortex
Impeller Engineered Plastic
Hardware Stainless steel Stainless steel
Motor Shaft AISI 1215 steel
Gasket Neoprene
  • 151328 63
  • Cert 60Hz
  • Cert Sspma
  • Upc
  • 50Hz
  • Cert Sspma
  • Upc

Technical Data

Warning

To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug. FOR ABOVE-GROUND INSTALLATION ONLY.

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    M72 (104) Single Auto 115 1 2.2 1/2 60 19 9
    M53 (105) Single Auto 115 1 5.2 1/3 60 30 14
    M55 (110) Single Auto 115 1 5.2 1/3 60 33 15
    M57 (115) Single Auto 115 0 1/3 60 35 16
    M59 (120) Single Auto 115 1 1/3 60 38 17
    M72 (132) Single Auto 115 1 2.2 1/2 60 19 9
    M98 (131) Single Auto 115 0 4.7 0 60 47 22
  • Product Model Comparison Chart: 50hz
    model seal mode volts phase amps kw hz lbs kg
    105 Single Auto 220 1 5.2 0.72 50 35 16
    135 Single Auto 220 0 3.6 0.56 50 49 22

Pump Performance Curves

Design Tools