900 Series

Package Systems and Basins

900 Series

Preassembled sump pump systems. Job-ready for a quick and easy installation.

Features and Benefits

Preassembled

  • Pump switch installed 180° from inlet
  • Discharge pipe is plumbed with a pre-drilled 3/16” (5 mm) vent hole
  • Electrical cord seal installed in cover
  • Cover sealed and bolted down
  • Basin filled with environmentally-safe peanuts for safe transit. Just add water and they dissolve
  • Automatic, cast iron or thermoplastic pump with tank and all hardware
  • 18” x 22” (46 x 56 cm)basin with 4” inlet
  • Deluxe unit has a radon approved basin and cover for radon prevention
  • Standard and economy models use a polyethylene basin and cover
  • Deluxe cover has a 3” vent, 1-1/2” discharge
  • Standard and economy covers have a 2” vent, 1-1/2” discharge
  • Fast, easy and job-ready

Deluxe and standard systems (model M53 pump)

  • Automatic, float-operated mechanical switch
  • 9' (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, guard, handle and switch arm
  • Passes 1/2” (50 mm) spherical solids
  • 1-1/2” NPT discharge
  • 1550 RPM
  • Non-clogging vortex impeller
  • Glass-filled polypropylene base with built-in strainer
  • Temperature rated 130 °F (54 °C)

Economy system (model M72 pump)

  • 9' (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, switch arm and lower motor housing
  • Oil-free pump
  • Passes 3/8” (10 mm) spherical solids
  • 1-1/2” NPT discharge
  • 3400 RPM
  • Non-clogging vortex impeller
  • Temperature rated 110 °F (54 °C)

Notes 
Job ready for easy installation.

Reserve powered design.
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Product Specifications

60hz 50hz
Hertz 60 Hz
Discharge Size 1-1/2" NPT
Cord Length 9' (2.7 m) standard
Impeller Type Non-clogging vortex
Hardware Stainless steel
  • Cert Sa

Technical Data

Warning

To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug.

Sales and Marketing

Sales Literature

Technical Support

Technical Support Literature