Welcome to our NEW website!

X

Drain Pump Series

img-title
Package Systems and Basins

Drain Pump Series

Removes water from areas where gravity flow is not available.

Features and Benefits

  • Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate and dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal.
  • No inlet filters or screens to clean
  • Optional top or side inlet
  • Can be installed with internal trap
  • Automatic pumps with tank cord seals
  • All hardware for easy assembly
  • Polypropylene basin and lid
  • Internal discharge pipe to lid (trap supplied by others)
  • Check valve (30-0181, not included with model 104)
  • Contact factory for additional inlet option or high head applications
  • Easy installation, no need to dig a sump
  • 132 comes preassembled

Pump features (models 53, 55, 57, 59, 98):

  • Passes laundry lint
  • Automatic, float-operated mechanical switch
  • 9' (3 m), UL listed, 3-wire cord and plug (15' [5 m] cord standard on model 98)
  • Stainless steel screws, guard, handle and switch arm
  • Passes 1/2” (12.7 mm) spherical solids
  • 1-1/2” NPT discharge
  • 1550 RPM on 50 series
  • 1725 RPM on model 98
  • Non-clogging vortex impeller
  • Glass-filled, polypropylene base with built-in strainer
  • Model 59 - all bronze construction
  • Models 57 and 98 - all cast iron construction
  • Temperature rated 130 °F (55 °C)
  • UL and cCSAus listed pump

Model 72:

  • Passes laundry lint
  • 9' (3 m), UL-listed, 3-wire cord and plug
  • Stainless steel screws, switch arm and lower motor housing
  • Oil-free
  • Passes 3/8” (9.5 mm) spherical solids
  • 1-1/2” NPT discharge
  • 3400 RPM
  • Non-clogging vortex impeller
  • Temperature rated 110 °F (43 °C)
  • cCSAus listed pump

Basin:

  • Polypropylene construction
  • Corrosion-resistant
  • High capacity
  • Gasket-sealed polypropylene lid
  • 2” NPT vent
  • 1-1/2” NPT discharge
  • 1-1/2” compression slip fit for top and side intake. Note: 132 comes preassembled, for side inlet only
  • Threaded connections for easy installation
  • May be installed with internal trap for space savings
  • Gas-tight cover
  • Temperature rated 130 °F (55 °C)
  • Fits under most sinks
  • Basin passes 10’ (3 m) stack test – Models 104 and 132 will not pass 10’ (3 m) stack test

Check valve (excluding model 104) (30-0181)

  • “Full Flow” design
  • 1-1/2” or 1-1/4" slip x slip union
  • PVC construction
  • For additional specifications, see FM0217.

Notes

Product may not be exactly as pictured.

Note: For additional inlet option or high head applications, consult factory.

Reserve Powered Design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Product Specifications

60hz 50hz
Motor 1/3 - 1/2 HP
Voltage 115 V
Phase 1 Ph
Hertz 60 Hz
RPM 1550 - 3400 RPM
Discharge Size 1-1/2" NPT
Solids Handling 0.5" (1.27 cm) spherical
Cord Length 9 ft (3m) or 15 ft (5m) standard
Cord Type UL listed, 3-wire cord and plug
Max Operating Temperature 130 °F (55 °C)
Motor Housing Bronze or cast iron
Pump Housing Bronze or cast iron
Base Glass-filled polypropylene, bronze or cast iron
Impeller Type Non-clogging vortex
Hardware Stainless steel
  • 151328 63
  • Cert 60Hz
  • Cert Sspma
  • Upc
  • 50Hz
  • Cert Sspma
  • Upc

Technical Data

WARNING

To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug. FOR ABOVE-GROUND INSTALLATION ONLY.

Model Comparison Charts

  • Product Model Comparison Chart: 60hz
    model seal mode volts phase amps hp hz lbs kg
    M72 (104) Single Auto 115 1 2.2 1/2 60 19 9
    M53 (105) Single Auto 115 1 5.2 1/3 60 30 14
    M55 (110) Single Auto 115 1 5.2 1/3 60 33 15
    M57 (115) Single Auto 115 0 1/3 60 35 16
    M59 (120) Single Auto 115 1 1/3 60 38 17
    M72 (132) Single Auto 115 1 2.2 1/2 60 19 9
    M98 (131) Single Auto 115 0 4.7 0 60 47 22
  • Product Model Comparison Chart: 50hz
    model seal mode volts phase amps kw hz lbs kg
    105 Single Auto 220 1 5.2 0.72 50 35 16
    135 Single Auto 220 0 3.6 0.56 50 49 22

Pump Performance Curves

Design Tools