North America / English Change

 

900 Series

Preassembled sump pump systems. Job-ready for a quick and easy installation.

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

Preassembled:

  • Pump switch installed 180° from inlet
  • Discharge pipe is plumbed with a pre-drilled 3/16” (5 mm) vent hole
  • Electrical cord seal installed in cover
  • Cover sealed and bolted down
  • Basin filled with environmentally-safe peanuts for safe transit. Just add water and they dissolve
  • Automatic, cast iron or thermoplastic pump with tank and all hardware
  • 18” x 22” (46 x 56 cm)basin with 4” inlet
  • Deluxe unit has a radon approved basin and cover for radon prevention
  • Standard and economy models use a polyethylene basin and cover
  • Deluxe cover has a 3” vent, 1½” discharge
  • Standard and economy covers have a 2” vent, 1½” discharge
  • Fast, easy and job-ready

Deluxe and standard systems (model M53 pump)

  • Automatic, float-operated mechanical switch
  • 9' (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, guard, handle and switch arm
  • Passes ½” (50 mm) spherical solids
  • 1½” NPT discharge
  • 1550 RPM
  • Non-clogging vortex impeller
  • Glass-filled polypropylene base with built-in strainer
  • Temperature rated 130° F (54° C)

Economy system (model M72 pump)

  • 9' (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, switch arm and lower motor housing
  • Oil-free pump
  • Passes 3/8” (10 mm) spherical solids
  • 1½” NPT discharge
  • 3400 RPM
  • Non-clogging vortex impeller
  • Temperature rated 110° F (54° C)
Notes

Job ready for easy installation.


Reserve powered design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

HERTZ
60 Hz
DISCHARGE SIZE
1-1/2" NPT
CORD LENGTH
9' (2.7 m) standard
IMPELLER TYPE
Non-clogging vortex
HARDWARE
Stainless steel
  • 2

Warning

To reduce the risk of electrical shock, a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug.

 

×
×