North America / English Change


Qwik Jon® Ultima

Economical sewage systems designed for free-standing or built-in installations

Features andBenefits
Literature and Documents

Install a Qwik Jon® Ultima just about anywhere

  • Contains 1/2 HP (0.7 kW) mini grinder pump
  • Preassembled pump and tank for easy installation
  • Model 202 includes a comfort-height, ADA-compliant, Zoeller rear outlet toilet with elongated bowl, or you can use Model 203 (60 Hz only) Ultima with a variety of rear outlet toilet styles
  • Can be installed either free-standing or behind a wall with the 2" MPT or 1-1/2" internal slip side inlets
  • No need to destroy concrete floors
  • No need to elevate floor
  • Designed to accommodate a toilet, lavatory, bathtub and/or shower
  • Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
  • Reduces construction costs
  • 1” discharge (can be reduced to 3/4” to replace existing systems)
  • Pumps any direction
  • Patent No. 7,203,976
  • 1.6 GPF (6.1 LPF)
  • Hardware to mount toilet to floor sold by others

Qwik Jon® Ultima features:

  • Non-corrosive, engineered thermoplastic, mini grinder pump
  • Premium grinder blade: Investment-cast 440 stainless steel cutter plate is engineered to handle cloth, latex and other hard to grind materials. Tri-Slice® Cutter Technology - three independent cutting channels provide over 250,000 cuter per minute.
  • Pump 100% factory tested after assembly
  • Automatic reset thermal overload protected
  • Hardened stainless steel cutter and disc
  • Carbon/ceramic mechanical shaft seal
  • Upper and lower ball bearing running in a bath of oil
  • All stainless steel hardware
  • ABS tank with 2” MPT of 1-1/2” slip side inlets
  • Preassembled with preset piggyback vertical float switch
  • Two models available, complete with toilet (model 202) or tank only adaptable to standard rear outlet toilets (model 203)

Qwik Jon® Ultima systems include:

  • Model 202: tank, mini grinder pump and a comfort height, ADA-compliant toilet with elongated bowl
  • Model 203 : tank and mini-grinder pump (standard rear outlet toilet with a discharge height of 4" (10 cm) from floor to centerline must be purchased separately)

Pump features:

  • Automatic level control switch
  • Thermal overload protected motor
  • Stainless steel screws, bolts and handle
  • Non-clogging vortex impeller
  • UL listed, 3-wire, neoprene 9' (3 m) cord and plug
  • Maximum temperature: 130 °F (54 °C)

Tank features:

  • Durable ABS tank with white finish
  • Light-weight
  • Built-in check valve

Items included:

  • Comfort-height, ADA-compliant toilet with elongated bowl (model 202 only)
  • Tank, lid and gasket
  • 1/2 HP mini grinder pump
  • Back-flow device (check local codes)
  • 1” discharge and 1-1/2” vent
  • Extension kit (model 203)
  • Hardware pack
  • Installation instructions
  • Model 202 shipping weight: 121 lbs (55 kg)
  • Model 203 shipping weight: 37 lbs (17 kg)

Items needed by the installer:

  • Supply fittings and waste pipe
  • Toilet (model 203 only)
  • Toilet seat
  • Electrical source with ground fault interrupter (GFCI) protected receptacle
  • Water supply
  • Tools

Model 203 not compatible with Zoeller rear outlet toilet.

These pumps not designed for use in any other application.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

Model 202 meets the Americans with Disabilities Act guidelines and ANSI A117.1 requirements for accessible and usable facilities—check local codes.

Caution: All installations of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA). Must be installed per local codes.

60 Hz
1/2 HP
115 V
1 Ph
3450 RPM
9 ft (3 m)
UL listed, 3-wire neoprene cord and plug
130 °F (54 °C)
Thermal overload
Carbon and ceramic
Non-clogging vortex
Stainless steel

  • 54
  • 2
  • 11
  • 55
  • 67

Performance Curves

Dimensional Data Drawings