North America / English Change

 

X840 Series

Hazardous environment, 2 HP grinder pumps.

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • cFMus and CSA rated Class I, Division 1, Group C & D
  • Finned, Class 30, cast iron construction
  • Corrosion-resistant, powder coated epoxy finish
  • Discharge size: 1-1/4" NPT
  • 20' (6 m) cord length
  • Oil-filled, hermetically-sealed motor with Class F insulation
  • Hardened stainless steel cutter and disc, Rockwell C55-60
  • Bronze vortex impeller
  • Upper and lower ball bearing construction
  • Stainless steel screws, bolts and lifting bail
  • Dual mechanical seals with leak detection
  • Automatic thermal overload protection (1 Ph)
  • Thermal sensor protection (3 Ph)
  • Legs provide for free-standing installation
  • Preassembled systems available
  • Threaded conduit connection on pump cap to provide protection to power cord and sensor wires

 

Standard Features:

  • Reversible cutter action (manual/auto**)
  • 1-1/4" NPT vertical discharge
  • Carbon/ceramic tandem seals
  • Thermal sensors** (overload on 1 Ph)
  • Moisture probes**
  • Balanced bronze impellers
  • Stainless steel cutter and plate (R-C 55-60)
  • Stainless steel shaft
  • Stainless steel lifting bail
  • Corrosion-resistant, powder coated epoxy paint
  • 20' (6 m) power cord, 20' (6 m) sensor cord
  • UL listed
  • Options:
    • Extended cord lengths
    • Anti-siphon device

**Requires circuit in control panel to function. Reversible feature only available on X840 models.
Patent No. 6,364,620

HERTZ
60 Hz
MOTOR
2 HP
VOLTAGE
200 - 575 V
PHASE
1 or 3 Ph
RPM
3450 RPM
TYPE
Capacitor start / capacitor run or 3 phase
INSULATION
Class F
AMPS
4.5 - 20.0 Amps
OPERATION
Nonautomatic
DISCHARGE SIZE
1-1/4" NPT
CORD LENGTH
20' (6 m) standard
CORD TYPE
UL listed, SOOW
MAX HEAD
125' (38.1 m)
MAX FLOW RATE
61 GPM (231 LPM)
MAX OPERATING TEMP
104° F (40° C)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload (1 Ph) or thermal sensor (3 Ph)
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Cast iron
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic with stainless steel parts
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Bronze
HARDWARE
Stainless steel
MOTOR SHAFT
416 stainless steel
  • 54
  • 26
  • 3
  • 8
  • 12
  • 59

Model Comparison Charts

Performance Curves

Dimensional Data Drawings

Warning

Not for use in acidic, methanol or ethyl acetate atmospheres.

 

×
×