North America / English Change

 

High Head Dose-Mate
150 Series

For septic tank, low pressure pipe (LPP) and enhanced flow STEP systems

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • Durable, cast iron construction
  • Model 151 (60 Hz) comes standard with a glass-filled, polypropylene base
  • Corrosion-resistant, powder coated epoxy finish
  • Stainless steel lifting handle
  • Assembled with stainless steel bolts
  • Non-clogging, engineered thermoplastic, vortex impeller design
  • Model 151 (60 Hz)  - 1/3 HP, passes ½" (13 mm) spherical solids
  • Model 152 - 4/10 HP (0.56 KW), passes ¾" (19 mm) spherical solids
  • Model 153 - 1/2 HP (0.71 KW), passes ¾" (19 mm) spherical solids
  • Motor -  3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected
  • Carbon/Ceramic seals
  • Upper sleeve bearing and lower ball bearing running in bath of oil
  • 20' (6 m), UL listed power cord with molded, 3-wire plug
  • 1½" NPT vertical discharge
  • BN and BE standard models include a 20' (6 m), variable level float switch
  • Operates at temperatures to 130° F (54° C) in effluent applications
  • All models include a 1½" x 2" PVC adapter fitting

Consult Factory for Special Applications:

  • Timed dosing panels
  • Electrical alternators for duplex systems are available and supplied with an alarm
  • Variable level control switches are available for controlling 1 Ph systems
  • Double piggyback, variable level float switches are available for variable level, long and short cycle controls
  • Sealed Qwik-Box available for outdoor installations - See FM1420
  • Over 130°F (54°C) - special quotation required

HERTZ
60 Hz
MOTOR
1/3 - 1/2 HP
VOLTAGE
115 or 230 V
PHASE
1 Ph
RPM
3450 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
3.2 - 10.5 Amps
OPERATION
Automatic or nonautomatic
DISCHARGE SIZE
1-1/2" NPT
SOLIDS HANDLING
1/2" (13 mm), 3/4" (19 mm) spherical solids
CORD LENGTH
20' (6 m) standard
CORD TYPE
UL Listed power cord
MAX HEAD
44' (13.4 m)
MAX FLOW RATE
77 GPM (291 LPM)
MAX OPERATING TEMP
130° F (54° C)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Plastic or cast iron
UPPER BEARING
Sleeve bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered thermoplastic
HARDWARE
Stainless steel
MOTOR SHAFT
AISI 1215 steel
GASKET
Neoprene
  • 54
  • 2
  • 8
  • 11

 

×
×