Latin America / English Change

 

High Head Waste-Mate
490 Series

Single Seal Series

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • For residential or light commercial
  • Transfer groundwater, effluent or unscreened, raw sewage.
  • Passes 38 mm (1-1/2") spherical solids
  • Powder coated epoxy finish
  • Ideal for applications with high total dynamic head
  • Hermetically sealed to be fully submersible
  • 100% factory tested

HERTZ
60 Hz
MOTOR
3.15 or 4.1 KW
VOLTAGE
380 V
PHASE
3 Ph
RPM
3450 RPM
INSULATION
Class B
AMPS
6.0 - 7.3 Amps
OPERATION
Nonautomatic
DISCHARGE SIZE
2" PT
SOLIDS HANDLING
38 mm (1-1/2") spherical solids
CORD LENGTH
6 m (20') standard
MAX HEAD
24.4 m (80'), 27.4 m (90')
MAX FLOW RATE
703 LPM (186 GPM), 738 LPM (195 GPM)
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
MOTOR PROTECTION
Finned motor housing for heat dissapation
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Cast iron
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Bronze
HARDWARE
Stainless steel
MOTOR SHAFT
SAE 1117 carbon steel
GASKET
Neoprene
  • 54
  • 3
  • 8
  • 11
HERTZ
50 Hz
MOTOR
1.93 or 2.6 kW
VOLTAGE
380 V
PHASE
3 Ph
RPM
2800 RPM
INSULATION
Class B
AMPS
4.0 - 5.0 Amps
OPERATION
Nonautomatic
AUTO ON/ OFF POINTS
2" PT
SOLIDS HANDLING
38 mm (1-1/2") spherical solids
CORD LENGTH
6 m (20') standard
MAX HEAD
16.8 m (55'), 19.8 m (65')
MAX FLOW RATE
622 LPM (164 GPM), 696 LPM (184 GPM)
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
CAP
Cast iron or bronze
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Cast iron
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Bronze
HARDWARE
Stainless steel
MOTOR SHAFT
SAE 1117 carbon steel
GASKET
Synthetic rubber
  • 14
  • 28
  • 8

 

×

 

×