Latin America / English Change

 

912 Preassembled Sewage Systems

Preassembled 24" x 24" (61 x 61 cm)Sewage System. Complete and job ready for fast installation.

 
 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

912 Sewage Systems include:

  • (1) 2” (50 mm) solids sewage ejector
  • (1) 24” x 24” (61 x 61 cm) poly-molded basin
  • (1) PSF cover with 2V2D
  • Internal 2” (DN50) PVC discharge pipe

Pump Features:

  • Cast iron construction (models 264/266)
  • Thermoplastic construction (model 211)
  • Automatic or piggyback configuration available
  • Full 2” (50 mm) spherical solids capacity
  • Thermal overload protection
  • Non-clogging vortex impeller

Basin Features:

  • 24" (61 cm) depth for easier installation in troublesome areas
  • 41 gallon (155 liter) capacity (exceeds 18 x 30)
  • 25 gallon (95 liter) capacity below 4" inlet
  • Vertical support ribs help eliminate stuck float switches
  • Anti-flotation device (AFD) helps to eliminate basin from “floating”
  • 360° molded handle (acts as secondary AFD)
  • (1) 4" pre-drilled inlet (flex-coupling provided by others)
  • (7) additional flat areas for inlet installation (field-drilled)
  • Molded torque stops for added pump support
  • One-piece molded PSF cover with integrated molded foam seal
  • Ribbed, reinforced cover to provide additional strength and stability
  • Threaded 2" vent and 2" discharge piping connections
  • Stainless steel cover bolts and hardware
  • High water alarm available on certain packages
  • Stackable for storage/shipping

HERTZ
60 Hz
MOTOR
4/10 HP - 1/2 HP (0.7 - 1.7 KW)
VOLTAGE
115 V
PHASE
1 Ph
RPM
1400 or 2800 RPM
TYPE
Split phase or permanent split capacitor
INSULATION
Class B
AMPS
4.4 - 8.5 Amps
OPERATION
Automatic
AUTO ON/ OFF POINTS
Vary based on package
DISCHARGE SIZE
2" (50 mm) NPT
SOLIDS HANDLING
2" (50 mm) spherical solids
CORD LENGTH
20' (6 m) standard
CORD TYPE
SOW/SOOW (CE model H07RN-F)
MAX HEAD
4.3 m (14'), 6.7 m (22'), 13.9m (45.6')
MAX FLOW RATE
20.9 m3/hr (92 GPM), 24 m3/hr (106 GPM), 33.8 m3/hr (149 GPM)
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Engineered plastic or cast iron
UPPER BEARING
Sleeve bearing
LOWER BEARING
Sleeve or ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered plastic or bronze
HARDWARE
Stainless steel
MOTOR SHAFT
AISI 1215 cold roll steel, 1144 steel or JIS S45C steel
GASKET
Neoprene
HERTZ
50 Hz
MOTOR
0.7 - 1.7 KW
VOLTAGE
220 V
PHASE
1 Ph
RPM
1400 or 2800 RPM
TYPE
Split phase or permanent split capacitor
INSULATION
Class B
AMPS
4.4 - 8.5 Amps
OPERATION
Automatic
AUTO ON/ OFF POINTS
Vary based on package
DISCHARGE SIZE
2" NPT
SOLIDS HANDLING
50 mm (2") spherical solids
CORD LENGTH
6 m (20') standard
CORD TYPE
SOW/SOOW (CE model H07RN-F)
MAX HEAD
4.3 m (14'), 6.7 m (22'), 13.9m (45.6')
MAX FLOW RATE
20.9 m3/hr (92 GPM), 24 m3/hr (106 GPM), 33.8 m3/hr (149 GPM)
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Engineered plastic or cast iron
UPPER BEARING
Sleeve bearing
LOWER BEARING
Sleeve or ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered plastic or bronze
HARDWARE
Stainless steel
MOTOR SHAFT
AISI 1215 cold roll steel, 1144 steel or JIS S45C steel
GASKET
Neoprene
  • 14

 

×

 

×