Latin America / English Change

 

Drain pumps with special options

Drain pump with 2" inlet (105-0010) and drain pump with high head (105-0010).

 
 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

Removes water from areas where gravity flow is unavailable.

Applications include laundry tray pump, wet bar sink, lavatory, air conditioning condensate or dehumidifier water removal. Can also be used in conjunction with dishwashers and garbage disposal applications.
No inlet filters or screens to clean.

Drain Pump Series Includes:

  • Automatic pumps with tank cord seals and all hardware for easy assembly
  • Polypropylene basin and lid
  • Internal discharge pipe to lid
  • Check valve (model 105: 30-0181, Model 135: 30-0102)
Pump Features
105-0010 (Model 53)

  • 2" inlet
  • Passes laundry lint
  • Automatic, float operated mechanical switch
  • 1550 RPM
  • 9' (2.7 m), UL listed, 3-wire cord and plug
  • Stainless steel screws, guard, handle and switch arm
  • Passes 1/2" (50 mm) spherical solids
  • 1 1/2" NPT discharge
  • Non-clogging vortex impeller
  • Glass-filled polypropylene base with built-in strainer
  • Temperature rated: 130° F (54° C)
  • UL listed pump
  • Shipping weight: 30 lbs (13.6 Kg)

Pump Features
135-0005 (Model 152)

  • High head
  • Passes laundry lint
  • Durable, cast iron construction
  • Corrosion-resistant, powder coated epoxy finish
  • Stainless steel lifting handle
  • Assembled with stainless steel bolts
  • Non-clogging engineered thermoplastic vortex impeller design
  • Passes 3/4" (19 mm)spherical solids
  • Temperature rated: 130° F (54° C)
  • Motor: 3450 RPM, oil-filled, hermetically-sealed, automatic reset thermal overload protected
  • Carbon/ceramic seals
  • Upper sleeve bearing and lower ball bearing running in bath of oil
  • 4/10 HP
  • 15' (5 m), UL listed power cord with molded, 3-wire plug and wired-in, vertical float switch
  • 1 1/2" NPT discharge
  • cCSAus certified pump
  • Shipping weight: 48 lbs (21.8 Kg)

Basin:

  • Polyethylene construction
  • Corrosion-resistant
  • High capacity
  • Gasketed, polyethylene lid
  • 2" NPT vent
  • 1 1/2" NPT discharge
  • 2" NPT inlet - no screen
  • Threaded connections for easy installation
  • Height: 15 1/2" (39.4 cm)
  • Width: 15 3/4" (40 cm)
  • Weight: 5 lbs (2.3 Kg)
  • Gas-tight cover
  • Temperature rated: 130° F (54° C)
  • Fits under single or double laundry tray sinks

Check Valve (30-0181)

  • 'Full Flow' design
  • 1 1/2" or 1 1/4" slip x slip union
  • PVC constructions

For additional specifications see FM0217

Check Valve (30-0102)

  • 'Full Flow' design
  • 1 1/2" solvent weld
  • PVC construction

For additional specifications see FM0217

Notes
Product may not be exactly as pictured.

Special Option Basin utilizes different basin than Zoeller Pump Company's standard system. This basin has a 2" side inlet only.

Easy installation - no need to dig a sump.

HERTZ
60 Hz
VOLTAGE
115 V
PHASE
1 Ph
RPM
1550 or 3450 RPM
DISCHARGE SIZE
1½" NPT
SOLIDS HANDLING
1/2" (13 mm) or 3/4" (19 mm)
CORD LENGTH
9' (3 m) or 15' (5 m)
CORD TYPE
3-wire
MAX OPERATING TEMP
130° F (54° C)
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Glass-filled polypropylene
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Industrial thermoplastic
HARDWARE
Stainless steel
  • 54
  • 2
  • 11

Warning

To reduce the risk of electrical shock a properly grounded receptacle of grounding type shall be installed and protected by a ground fault circuit interrupter (GFCI) in accordance with national electrical code and local codes. Do not remove ground pin from plug.

 

×

 

×