Latin America / English Change

 

2000 High Temperature Intermittent

Models 2057, 2098, 2137, 2282 Submersible pumps for use in dewatering applications. Intermittent use up to 200° F(93° C).

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • All models are designed to meet specifications with assurance by using high temperature parts rated for intermittent 200° F (93° C) contact.
  • High temperature switch components rated for intermittent service up to 200° F (93° C)
  • Available in a variety of styles and performances
  • All models built to last
  • High temperature motor leads and thermal overload protection
  • 100% corrosion-resistant, powder coated epoxy finish
  • 10' (3 m) cord, high temperature, adjustable float-operated mechanical switch mounts directly to the discharge pipe
  • 1½", 2" or 3" discharge
  • Adjustable float switch is not intended for continuous contact with 200° F (93° C) water.
  • All stainless steel fittings
  • 100% factory tested and approved

Typical Installations:

  • Boiler blow down
  • Hot water transfer
  • Plant wash down
  • Transformer vaults
  • Industrial steam cleaning

Switch Data:

  • 16 guage, 2 conductor SOOW switch cordage
  • Float housing constructed of high impact ABS
  • 13.0 Amps (max) steady state
  • Intermittent direct contact with up to 200° F (93° C) water
  • Turbulence-resistant float switch
  • Adjustable pumping range (see chart)
  • Unlimited repetitive exposures are permissible for applications below 180° F (82° C)

HERTZ
60 Hz
MOTOR
3/10 - 1/2 HP
VOLTAGE
115 or 230 V
PHASE
1 Ph
RPM
1725 RPM
AMPS
4.7 - 10.7 Amps
OPERATION
Nonautomatic
DISCHARGE SIZE
1-1/2" - 3"
SOLIDS HANDLING
1/2" - 3/4" (13 mm - 19 mm)
CORD LENGTH
15' (5 m) standard
CORD TYPE
16-3 SOOW cord
MAX HEAD
25' (7.6 m)
MAX FLOW RATE
115 GPM (435 LPM)
MAX OPERATING TEMP
200° F (93° C)
COOLING
Oil filled
MOTOR PROTECTION
High temperature thermal overload
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Cast iron
UPPER BEARING
Varies based on package
LOWER BEARING
Varies based on package
MECHANICAL SEALS
Carbon and NI-resist
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Cast iron
HARDWARE
Stainless steel
MOTOR SHAFT
AISI cold rolled steel
GASKET
Neoprene

  • 54
  • 8
×

 

 

×