Latin America / English Change

 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • Oil-filled, hermetically-sealed motor with automatic reset thermal overload protection
  • Rugged, cast iron motor housing with corrosion-resistant, baked-on enamel finish
  • Efficient heat sink for heat dissipation
  • Glass-filled polypropylene base and pump housing with no screen
  • Passes 3/8” (9 mm) spherical solids
  • Reliable tethered float switch
  • Carbon and ceramic rotary seal
  • Watertight, neoprene seal between motor and cover
  • Stainless steel screws and hardware
  • Temperature rating: 104 °F (40 °C)
  • On point: 11-1/4” (28.6 cm) 
  • Off point: 4-1/8” (10.5 cm)
  • Maximum width: 8-3/32" (21 cm) 
  • Maximum height: 10-1/2" (26.7 cm)
  • Weight: 11 lbs (5 Kg)
  • Fits 12" (30 cm) diameter pits
  • 100% factory tested after assembly

HERTZ
60 Hz
MOTOR
0.5 kW
VOLTAGE
115 V
PHASE
1 Ph
RPM
3450 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
5.5 Amps
OPERATION
Automatic or nonautomatic
AUTO ON/ OFF POINTS
11-1/4" / 4-1/8" (28.6 cm / 10.5 cm)
DISCHARGE SIZE
1-1/2" PT
SOLIDS HANDLING
3/8" (9 mm) spherical solids
CORD LENGTH
25' (8 m) standard
MAX HEAD
25' (7.6 m)
MAX FLOW RATE
159 LPM (42 GPM)
MAX OPERATING TEMP
104 °F (40 °C)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Glass-filled polypropylene
MOTOR HOUSING
Cast iron
PUMP HOUSING
Glass-filled polypropylene
BASE
Glass-filled polypropylene
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered plastic
HARDWARE
Stainless steel
MOTOR SHAFT
Carbon steel
GASKET
NBR

  • 54
  • 3
  • 8
HERTZ
50 Hz
MOTOR
0.44 kW
VOLTAGE
220 V
PHASE
1 Ph
RPM
2850 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
2.2 A
OPERATION
Automatic or nonautomatic
AUTO ON/ OFF POINTS
28.6 cm / 10.5 cm (11-1/4" / 4-1/8")
DISCHARGE SIZE
1-1/2" NPT (CE models BSPT)
SOLIDS HANDLING
9 mm (3/8") spherical solids
CORD LENGTH
4.5 m (15') standard
CORD TYPE
SOW/SOOW (CE model H07RN-F)
MAX HEAD
7.6 m (25')
MAX FLOW RATE
159 lpm (42 gpm)
MAX OPERATING TEMP
40 °C (104 °F)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Glass-filled polypropylene
MOTOR HOUSING
Cast iron
PUMP HOUSING
Glass-filled polypropylene
BASE
Glass-filled polypropylene
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered plastic
HARDWARE
Stainless steel
MOTOR SHAFT
Carbon steel
GASKET
NBR

  • 14
  • 28
  • 8

Model Comparison Charts

Performance Curves

Dimensional Data Drawings

×

 

 

×