Europe, Middle East and Africa / English Change

 

Aquanot® 508

12 Volt backup sump pump system

 
 
 
Features andBenefits
TechnicalData
Literature and Documents

Designed using Zoeller®'s time-tested components giving you the needed performance and reliability.

PUMP:

  • 12 V, highly-efficient, non-corrosive pump construction. Supplied with 6' (1.8 m) leads.
  • NOT a Bilge pump. Designed, Engineered and Assembled by Zoeller® as a sump pump
  • Integrated check valve
  • Legs allow free-standing installation
  • Quick disconnect discharge
  • Aluminum seal pocket and cooling plate
  • Hand built and 100% tested in USA
  • Efficient design means more water pumped during emergencies.

CONTROL BOX: Includes battery burn-out and overcharge protection. The self-contained, 10 amp battery recharger system is a solid-state, automatic controller with alarms, light indicators and warning systems.

LCD SCREEN: Always displays battery voltage along with other helpful information about the system.

LED LIGHT INDICATORS:

  • AC Power - blinks red when power is out
  • Charged - green indicates battery is fully charged
  • Charging - yellow indicates power is going to battery
  • Low Battery - red light blinks when below 10.8 volts and rapidly blinks when below 8.4 volts
  • High Water - yellow light will blink when the float is activated, and becomes solid after 3 seconds
  • Alarm Off - yellow light indicates the buzzer is currently silenced

ALARMS:

  • High Water
  • Reverse Polarity
  • Low Battery

BUTTONS:

  • Scroll - display information on the system such as DC pump cycles and power outages
  • Alarm Reset - press to reset alarms. Press and hold for three seconds for 24-hour buzzer silence

AUXILIARY ALARM CONTACT: A set of dry contacts allows system to connect to home security alarm, auto dialers, etc.

SWITCH: Reliable, low voltage vertical float switch

BATTERY CASE: The included battery case will accommodate maximum battery dimensions of 13" L x 7½" W x 9½" H (33 cm L x 19 cm W x 24 cm H) and fits all group size 27, 29 and 31 batteries. Made from non-corrodible polyethylene. To use multiple batteries, order extra battery case with hook-up wire (P/N 007861).

FITTINGS: An integrated DC pump discharge check valve, additional AC pump check valve, tee, and adapter are included.

TECHNOLOGY: This charger uses the latest switch mode technology available. This allows for an extremely efficient charger in a compact design. It satisfies the rigid California Battery Council standards. Charger is also cURus approved.

Performance Curves

Dimensional Data Drawings

 

×

 

×