Europe, Middle East and Africa / English Change

 

Floor Sucker
40 Series

Use Floor Sucker utility pumps submerged or on any flat surface to pump clear water.

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • Use fully or partially submerged
  • Durable, polypropylene housing
  • 3-prong power cord, 9' or 20' (3 or 6 m)  
  • High-quality, sealed motor
  • Thermal overload protected motor
  • Model 42 is adaptable for use with standard garden hose (fitting included), 1" NPT pipe or 1-1/4" slip fit (use discharge hose kit P/N 1010-0117)
  • Model 44 (60 Hz) is adaptable for use with standard garden hose (fitting included), 1-1/4" female NPT or 3/4" female NPT adapter
  • Model LM44 (60 Hz) with automatic operation.  Utility applications only*
  • Model 46 (60 Hz) has a 2" NPT discharge with a 2" hose adapter
  • Screened bottom may be removed to allow easy cleaning
  • Use indoors or outdoors
  • Typical applications: dewatering and filling
  • Oil-free (models 42 and 44 only)
  • Models 42 and 44 remove water from any flat surface down to 1/8" (3 mm).  Model 46 will pump down to 1" (25 mm).
  • Light-weight and portable
  • Compact design: models 42 and 44 will fit in a 7" (178 mm) opening.  Model 46 will fit in an 8" (203 mm) opening.
  • Temperature rating: 104° F (40° C)

HERTZ
60 Hz
MOTOR
1/6 - 1/2 HP
VOLTAGE
115 V
PHASE
1 Ph
RPM
3450 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
1.5 - 6.0 Amps
OPERATION
Automatic and nonautomatic
DISCHARGE SIZE
Various
CORD LENGTH
9 or 20' (3 or 6 m) standard
CORD TYPE
3-prong
MAX HEAD
33' (10 m)
MAX FLOW RATE
3,300 GPH (12,492 LPH)
MAX OPERATING TEMP
104° F (40° C)
COOLING
Oil free or oil filled
MOTOR PROTECTION
Auto reset thermal overload
MOTOR HOUSING
Engineered plastic
BASE
Engineered plastic
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Enginnered plastic
HARDWARE
Stainless steel
MOTOR SHAFT
SUS 416 stainless steel
GASKET
NBR

  • 54
  • 3
  • 11
HERTZ
50 Hz
MOTOR
0.14 or 0.32 KW
VOLTAGE
220 V
PHASE
1 Ph
RPM
2850 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
0.6 - 1.4 Amps
OPERATION
Nonautomatic
DISCHARGE SIZE
1" or 1-1/4" NPT
CORD LENGTH
3 m (9') standard
MAX HEAD
6.1 m (20')
MAX FLOW RATE
144 LPM (38 GPM)
MAX OPERATING TEMP
40°C (104°F)
COOLING
Oil free or Oil filled
MOTOR PROTECTION
Thermal overload
MOTOR HOUSING
Engineered plastic
BASE
Engineered plastic
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered plastic
HARDWARE
Stainless steel
MOTOR SHAFT
SUS 416 stainless steel
GASKET
NBR
  • 14
  • 28

 

×

 

×