Europe, Middle East and Africa / English Change

 

The Shark®
810, 815 Series

Progressing cavity grinder pump

 
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

  • Finned, class 30 cast iron construction
  • Oil-filled, hermetically-sealed motor with Class B windings
  • Hardened stainless steel cutter and disc, Rockwell C55-60
  • Stainless steel hydraulic pump rotor
  • Pressure relief valve
  • Upper and lower ball bearing construction
  • Carbon/ceramic mechanical seal
  • Integral thermal overload protection with automatic reset
  • Stainless steel mounting stand for free-standing installation
  • Preassembled systems available

Standard Features:

  • 1 ¼” NPT discharge
  • Carbon/ceramic tandem seals
  • Hydraulic stainless steel rotor and Buna N stator
  • Stainless steel cutter plate/cutter
  • Stainless steel shaft and hardware
  • Corrosion-resistant, powder coated epoxy finish
  • 20' (6 m) power cord.  25', 35' and 50' (8 m, 11 m, 15 m) options available
Notes

Product may not be exactly as pictured.

 

Note: All variable level float switches in this section are mechanically activated and do not contain mercury.

 

922 Packaged Systems: Refer to FM2370 for packaged fiberglass or poly-ribbed basin assemblies for the models 810 and 815.

HERTZ
60 Hz
MOTOR
1 - 2 HP
VOLTAGE
230 V
PHASE
1 Ph
RPM
1750 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
6.0 - 10.5 Amps
OPERATION
Nonautomatic
DISCHARGE SIZE
1-1/4" NPT
CORD LENGTH
6 m (20') standard
CORD TYPE
3-wire neoprene
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Stainless steel stand
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Hydraulic rotor
IMPELLER
Stainless steel
HARDWARE
Stainless steel
MOTOR SHAFT
Stainless steel
GASKET
Neoprene

  • 54
  • 2
  • 8
  • 12
HERTZ
50 Hz
MOTOR
2 KW
VOLTAGE
230 V
PHASE
1 Ph
RPM
1400 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
8.5
OPERATION
Nonautomatic
DISCHARGE SIZE
1-1/4" NPT
CORD LENGTH
6 m (20') standard (CE model 10 m [33'])
CORD TYPE
SOW/SOOW (CE model H07RN-F)
MAX HEAD
73.2 m (240')
MAX FLOW RATE
2.45 m3/hr (10.8 GPM) (.68 LPS)
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Cast iron
MOTOR HOUSING
Cast iron
PUMP HOUSING
Cast iron
BASE
Stainless steel stand
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Hydraulic rotor
IMPELLER
Stainless steel
HARDWARE
Stainless steel
MOTOR SHAFT
Stainless steel
GASKET
Neoprene

  • 14
  • 28
  • 8

Selection Guide

Accessories for Field Assembled Systems:

  • Flex-hose discharge assembly, P/N 10-2038 with 30" (76 cm) hose
  • Square guide rail system, P/N 39-0106 48” (122 cm) deep basin, P/N 39-0107 60” (152 cm) deep basin, P/N 39-0108 72” (183 cm) deep basin
  • Rail extension bracket P/N 39-0070
  • Stainless steel lifting cables and rod P/N 39-0031 8’ (2.4 m) cable, P/N 39-0032 12’ (3.7 m) cable, P/N 39-0069 1’ (0.3 m) rod
  • Pre-wired conduit (10-0580 Qwik Box required) 5100-0016 – 25’ (8 m), 5100-0017 – 35’ (11 m), 5100-0018 – 50’ (15 m)
  • Galvanized 1.25” discharge elbow P/N 018386
  • Check valve P/N 30-0223 1.25” NPT brass
  • Ball valve P/N 30-0165 1.25” PVC

Accessories

 

×

 

×