Europe, Middle East and Africa / English Change

 

Qwik Jon® Ultima

Economical sewage systems designed for free-standing or built-in installations

 
   
 
Features andBenefits
ProductSpecifications
TechnicalData
Literature and Documents

Install a Qwik Jon® Ultima just about anywhere

  • Contains ½ HP (0.7 KW) mini grinder pump
  • Preassembled pump and tank for easy installation
  • Model 202 includes a comfort-height, ADA-compliant, Zoeller rear outlet toilet with elongated bowl, or you can use Model 203 (60 Hz only) Ultima with a variety of rear outlet toilet styles
  • Can be installed either free-standing or behind a wall with the 2" MPT or 1-1/2" internal slip side inlets
  • No need to destroy concrete floors
  • No need to elevate floor
  • Designed to accommodate a toilet, lavatory, bathtub and/or shower
  • Perfect for basements, cabins, workshops, garages, additions, pool houses, etc.
  • Reduces construction costs
  • 1” discharge (can be reduced to ¾” to replace existing systems)
  • Pumps any direction
  • Patent No. 7,203,976
  • 1.6 GPF (6.1 LPF)
  • Hardware to mount toilet to floor sold by others

Qwik Jon® Ultima features:

  • Non-corrosive, engineered thermoplastic, mini grinder pump
  • Dual cutting action provides over 70,000 cuts per minute (50 Hz: 60,000 cuts per minute), greatly reducing the potential for clogging and increasing pump reliability.
  • Pump 100% factory tested after assembly
  • Automatic reset thermal overload protected
  • Hardened stainless steel cutter and disc
  • Carbon/ceramic mechanical shaft seal
  • Upper and lower ball bearing running in a bath of oil
  • All stainless steel hardware
  • ABS tank with 2” MPT of 1 ½” slip side inlets
  • Preassembled with preset piggyback vertical float switch
  • Two models available, complete with toilet (model 202) or tank only adaptable to standard rear outlet toilets (model 203)

Qwik Jon® Ultima systems include:

  • Model 202: tank, mini grinder pump and a comfort height, ADA-compliant toilet with elongated bowl
  • Model 203 : tank and mini-grinder pump (standard rear outlet toilet with a discharge height of 4" (10 cm) from floor to centerline must be purchased separately)

Pump features:

  • Automatic level control switch
  • Thermal overload protected motor
  • Stainless steel screws, bolts and handle
  • Non-clogging vortex impeller
  • UL listed, 3-wire, neoprene 9' (3 m) cord and plug
  • Maximum temperature: 130°F (54°C)

Tank features:

  • Durable ABS tank with white finish
  • Light-weight
  • Built-in check valve

Items included:

  • Comfort-height, ADA-compliant toilet with elongated bowl (model 202 only)
  • Tank, lid and gasket
  • ½ HP mini grinder pump
  • Back-flow device (check local codes)
  • 1” discharge and 1 ½” vent
  • Extension kit (model 203)
  • Hardware pack
  • Installation instructions
  • Model 202 shipping weight: 121 lbs (55 Kg)
  • Model 203 shipping weight: 37 lbs (17 Kg)

Items needed by the installer:

  • Supply fittings and waste pipe
  • Toilet (model 203 only)
  • Toilet seat
  • Electrical source with ground fault interrupter (GFCI) protected receptacle
  • Water supply
  • Tools
Notes

Model 203 not compatible with Zoeller rear outlet toilet.


These pumps not designed for use in any other application.


For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.


Model 202 meets the Americans with Disabilities Act guidelines and ANSI A117.1 requirements for accessible and usable facilities—check local codes.

Caution: All installations of controls, protection devices and wiring should be done by a qualified licensed electrician. All electrical and safety codes should be followed including the most recent National Electric Code (NEC) and the Occupational Safety and Health Act (OSHA). Must be installed per local codes.

HERTZ
60 Hz
MOTOR
1/2 HP
VOLTAGE
115 V
PHASE
1 Ph
RPM
3450 RPM
DISCHARGE SIZE
1"
CORD LENGTH
9 ft (3m)
CORD TYPE
UL listed, 3-wire neoprene cord and plug
MAX OPERATING TEMP
130°F (54°C)
MOTOR PROTECTION
Thermal overload
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
HARDWARE
Stainless steel

  • 2
  • 55
HERTZ
50 Hz
MOTOR
0.7 KW
VOLTAGE
220 V
PHASE
1 Ph
RPM
2800 RPM
TYPE
Permanent split capacitor
INSULATION
Class B
AMPS
3.4 Amps
OPERATION
Automatic
AUTO ON/ OFF POINTS
Preset
DISCHARGE SIZE
1" (3/4" adaptable)
SOLIDS HANDLING
Grinder
CORD LENGTH
5 m (15') standard
CORD TYPE
UL listed 3-wire neoprene
MAX HEAD
7 m (23 ')
MAX FLOW RATE
9.6 m3/hr (42.8 GPM)
MAX OPERATING TEMP
54°C (130°F)
COOLING
Oil filled
MOTOR PROTECTION
Auto reset thermal overload
CAP
Engineered thermoplastic
MOTOR HOUSING
Cast iron
PUMP HOUSING
Engineered thermoplastic
BASE
Engineered thermoplstic
UPPER BEARING
Ball bearing
LOWER BEARING
Ball bearing
MECHANICAL SEALS
Carbon and ceramic
IMPELLER TYPE
Non-clogging vortex
IMPELLER
Engineered plastic
HARDWARE
Stainless steel
MOTOR SHAFT
AISI 1215 cold rolled steel
GASKET
Closed cell tank gasket; BUNA-N pump gaskets
  • 14
  • 28
  • 5

 

×

 

×