Your Peace of Mind is Our Top Priority

• FM listed motor for Class 1, Division 1, Group C & D environments
• Non-clogging vortex impeller design bronze class 88-8-0-4
• Stainless steel rotor shaft
• Sensor leads and power leads in one cord for easy installation
• Durable cast iron (class 30, 30000# tensile strength) constructed cover, motor adapter and pump housing
• 1 ¼” NPT (nonauto), 1 1/2" NPT (auto): Threaded conduit connection for protecting cords in extra heavy duty applications
• Stainless steel plate, boolts, handle, guard and float rod guide, switch arm and actuator assembly
• Brass float and float rod (automatic only)
• Moisture sensors prewired in motor housing (functionality requires indicator circuit in panel)
• Zoeller custom panel with intrinsically safe relays and moisture indicator is required with nonautomatic units
• 3 Phase models available as nonautomatic only
• Oil-filled, hermetically sealed motor, automatic reset thermal overload protected (3 phase requires circuit in control panel)
• Maximum temperature for effluent or dewatering 104°F (40°C)
• Shaft seal: stainless steel wetted parts, carbon and ceramic rotary face seal
• Upper ball bearing and lower ball bearing running in bath of oil
• Neoprene square ring seals
• All X180 models pass ¾” spherical solids
• Model X191 pump passes 5/8” spherical solids
• Major width: 13 5/16"
• Major height: 22" (nonauto), 24 15/16" (auto)
• On point: 19 1/2"
• Off point: 9 3/4" (automatic)
• Available in nonautomatic units only
• 1 ½” NPT discharge standard, 2” and 3” NPT flange available
• 100% submerged and computerized tested
• Corrosion resistant powder coated epoxy finish

For automatic model: Use optional model 10-1037 seal failure panel to enable moisture sensor circuit.

Product may not be exactly as pictured.

Note: The sizing of effluent systems normally requires variable level float(s) controls and properly sized basins to achieve required pumping cycles or dosing timers with non-automatic pumps.

Reserve powered design.

For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.

*See charts for FM listings.