Your Peace of Mind is Our Top Priority

30-0021: 2" plastic slip x slip unions
30-0151: 2" cast iron slip x slip unions
Features:

• Full 2" flow design - meets BOCA (P.604.2)
• 2" Full Flow Pump Code
• Checks backflow of water and sewer gas
• Simple to install (no threading of pipe required). Save time & material costs
• Neoprene gasket and flapper, weighted with heavy stainless steel metal backing plates and stainless steel rivet
• Can be installed on vertical or horizontal line
• Slips over ABS, PVC, steel pipe or cop per piping
• Reduces motor and pump noise from plumbing system
• Meets requirements of Wisconsin Uniform Plumbing Code
• Flexible neoprene slip x slip union includes stainless steel clamps for low pressure systems. Avoid more than 10 ft. static head above the check valve. 4.3 PSI at 130°F.
• Stainless steel screws
• Extra wide hinge to reduce hinge stress
• Plastic check has PVC body and can be installed with solvent welded couplings for pressure systems to 25 PSI (57 ft. of Head) (P/N 30-0023)
• Model 30-0151 has corrosion resistant powder coated epoxy finish
• Stainless steel sleeves available to meet Illinois plumbing code. C.I. 30-0201 / PVC 30-0202
• Plastic check individual rack pack Model 30-0022
• 6 per carton

30-0181/30-0200: 1 1/2" or 1 1/4" slip x slip union
Features:

• Flapper bends over a radius, no sharp 90° edges—lengthens life of flapper hinge
• PVC plastic check body, ultrasonically welded and can be solvent welded for rigid pressure rated piping systems to 25 PSI - (57 ft. of Head) at 130°F. (30-0182)
• Vertical or horizontal installation
• Available in individual packages for pegboard display (30-0191)
• All stainless steel screws, nuts and clamps on model 30-0200 only
• Slip x Slip for 4.3 PSI (10 ft. of Head) at 130°F. Avoid more than 10 ft. static head above the check valve
• Designed to reduce water hammer
• 10 per carton